Delivery Time:15 days after receving deposit
Certification:ISO

Maximum 100KN Test Force Tensile / Compression Tester For All Kinds Of Material 

Brief Introduction

This machine mainly used for metallic material,non-metallic material ,compound material and wires, it does

testing for tensile,compressive,bending,shear,tearing and many type of mechanical test. It can according

with the standard to GB,ISO,JIS,ASTM,DIN and users requirements and process test data, then print out

test curve and report. 

Main Application

This type of machine applies construction,spaceflight,engine making,wire cable,rubber plastic,spin , etc. 

Main Applicants

Our products are ideal testing equipment of relative manufacturing enterprise, college, scientific and

research department, technical supervision department.

Main Features:

1. This machine adopts AC Servo Motor and driver by speed-down system to drive precision silk-bar,

Hardcore of control system is full-digital controller. It’s used software of Windows system for control and

data processing, realize adjust of the testing speed, and complete testing of metallic and non-metallic

material for tensile,compressive,bending ,at the testing process low-noise,placidity and high-efficiency.

2. It adopts international advanced of testing machine control technology, to realize equal

speed,displacement and test force control.

3. It adopts brand computer to realize setting of test parameters and control of test process, data

acquisition, processing, analysis and display(test data include: upper and lower yield point, tensile

strength, breaking strength, modulus of elasticity, elongation of every point, etc) with precision control and

measurements.

4. It is used software of electrical universal testing machine of Windows system and measure parameter of

materials according to national standard and users requirements and process test data, then print our

test curve and reports: can choose stress-strain,load-strain,load-time,load-displacement,displacement-

time , etc. It also has the function of magnification, comparison, traverse, intelligent and convenience.

5. It can regulate the lifting speed of beam when the specimen is clamped and operates flexibly and can

switch arbitrarily.

6. It has function of limit protection and overload protection, very reliable and safe.

7. It can create a strong database, and the database can save,lookup,transfer at any time.

8. It can cross change kinds of clamp to do kinds of materials testing.

Specifications:

	LY-05	LY-2	LY-5	LY-10	LY-20	LY-50	LY-100
Max.Test force	500N	2KN	5 KN	10KN	20KN	50KN	100KN
Scope of Scale	Max. Test force of 2%~100%(can choose 0.4%～100%)
Veracity of test force	Precede indicating value of±1%(±0.5%is special choose)
Beam displacement scale	The resolution is 0.01mm
Veracity of distortion	Range of extensometer of full measuring span 2%～100%,better than ±1%
Scope of timing	0.01—500mm/min
Max. travel of beam	600mm
Main frame	Door-frame
Size of frame	760×540×1650mm
Weight	300kg	400kg	500kg

Customized Clamps