Delivery Time:15 days after receive the deposit
Certification:ISO 9001: 2008

Edge / Side / Corner Package Testing Equipment 80KG Load  Drop Testing​

Brief Introduction 

This drop tester is used to simulate droping and impacting when package in transportation,assembling or un-assembling, check the package impacting resistance or the  rationality of the package  design. You can do the edge,side,corner test,testing height can be adjusted,releasing device is flexible and reliable, make sure the test specimen will not be affected by external force when in releasing moment or dropping freely.

What is Drop Testing? 

Drop testing determines the ability of a package to withstand the rigors of handling by people and machinery in the distribution environment. Numerous studies have shown conclusively that a truly flat drop represents the worst possible input to a packaged product. Therefore, it is crucial that laboratory drop testing be done on a drop test system designed to insure the flattest impacts possible. In addition to accurate flat drop testing, this machine allows drop testing to be performed on the package\'s edges and corners, for complete performance evaluation. Drop Testers allow you to thoroughly examine the effectiveness of package cushioning and its ability to protect your product, dunnage, closures, and other critical design attributes when exposed to all possible drop test orientations.

Theory

This machine simulates the freedom drop movement from different heights. 

Standard

Design standards:ISO 2248 JIS Z0202-87 GB/T4857.5-92

Specifications

Item	Specification
Height range	30~180cm
Load	80kg
Single-wing area	30(W)´75(d) cm
Baseboard area	120(W)´150(D) cm
Test space	87(W)´74(D)´40(H)~160 cm
Loading bearing	60 kg
Sample Maximum Height	MAX: 2m
Volume (about)	120(W) ×140(D) ×210mm (H)(don’t include control cabinet)
Weight (about)	400 kg
Power	1∮ AC 220V  50Hz(or customize as you need)
Motor-driven speed(up-down)	(2cm / sec);

Maintain Procedure 

1. Keep the machine clean.

2.Wipe the metal surface at regular intervals by using boiled oil,wipe the screw and gear with lubricating oil to maintain the machine and keep the machine long-life time.

Attention Items

1.This machine is suitable for 3phase,380V power.

2.Please don\'t machine in inflammable environment.

3.Machine need to connect earth ground,or it will electric shock.

4.Use air switch with earth leakage protection.

5.When machine in operation,please don\'t machine other parts except controlling panels,in case of bruise

6.If moving machine,move it after 5 minutes after cutting off machine power.

Control Panel