Specification Details: 1) N80-Q Chemical Component Analysis(%): P: <0.030; S: <0.030; 2) Monthly Capacity: 5000 tons. 3) Mechanical Properties: Ultimate Strength: > 689Mpa; Yield Strength: (552-758)Mpa; 3) Delivery Condition: Annealed(A), Bright Annealing, Normalized(N), Stress Relief Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 4) Surface treatment: API 5CT - Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end 5) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 6) Relevant Test: API 5CT-Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test, magnetic particle testing; 4) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 6) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 7) Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc; 9) Applications: Oil Industry, Hydraulic and Petrochemical Purpose, etc. 8) Place of orgin: China Mobile: +86 138 128 775 59 -->Terry(Chief Business Executive Officer) Email: terry@hc-pipe.com Commercial Information: 1) Delicery time: (45-60) days ready at mil also according to the actual weightl ; 2) Minium order : 50 Ton/Item while not stock material; 4) Term of payment : T/T or irrepealable L/C; 5) Delivery Port : Shanghai Port ; 6) Offer Validity : 5-7 Days ; 7) Container : 20GP or 40GP or Bulk ; 8) Manufacture methods : Cold Finished method or hot finished Method.