Specification Details:

1)  AISI-5140 Chemical Component Analysis(%):
      C: 0.38-0.43;  Mn: 0.70-0.90;   P: <0.040;  S:<0.040; Si: 0.15-0.35; Cr: 0.70 -0.90;

2) Monthly Capacity: 6000 Tons.

3) Delivery Condition: Cold Work, Annealed(A), Bright Annealing, Normalized(N), Stress Relief Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc;

4) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end

5)  Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B)

6) Relevant Test: ASTM A519-Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test,  magnetic particle testing;

7) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement;

8)  Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires;

9) Packing Type: Round , Square, Rectangle, Hexagon.  Streamline, etc;

10) Applications: Automobile and Bearing Industry, Mechanical and Structral Purpose, Hydraulic and Petrochemical Purpose,

etc.

11) Place of orgin: China

Mobile: +86 138 128 775 59 -->Terry(Chief Business Executive Officer)
Email: terry@hc-pipe.com / tubesolution@sina.com
 

Commercial Information:
  1) Delicery time: (45-60) days ready at mil also according to the actual weightl ; 
  2) Minium order : 15 Ton while no stock raw material
  4) Term of payment     :  T/T  or Irre. L/C irrepealable L/C;
  5) Delivery Port              :  Shanghai Port ;
  6) Offer Validity              :  5-7 Days        ;
  7) Container                   :  20GP or 40GP or Bulk ;
  8) Manufacture methods  :  Cold Finished method or hot finished Method.