Product Details
Features:
- Up to 4-fiber ribbon splicing.
- Cladding alignment with fixed v-grooves.
- Environmental resistant features.
- Arc calibration-free system.
- 4.1" TFT color LCD monitor.
- Dual directional operation system.
- Long life battery.
- Software upgrade via Internet.
- Detachable work table (attached to carrying case).
SPECIFICATIONS:
- Applicable type of fibers : SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655)
- Fiber count : Single, 2 and 4
- Applicable fiber dimensions : Ribbon : Cladding diameter 125μm, Ribbon fiber thickness 0.25 to 0.4mm
Single : Cladding diameter 125μm, Coating diameter 250μm and 900μm
- Fiber cleaved length : 10mm
- Splicing modes : Total 100 modes
- Typical splice loss : 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS.
(Measured by cut-back method relevant to ITU-T standard).
- Return loss : >>60dB
- Splicing time : Typical 20sec. with standard SM( ITU-T G.652)
- Splice loss estimate : Available
- Tube heater / heating time : Built-in tube heater with 30 heating modes. / Typical 40sec with Fujikura FP-04T and 50sec with FP-05.
- Applicable protection sleeve : 60mm, 40mm and Fujikura FPS01 series
- Storage of splice result : The last 2000 results to be stored in the internal memory.
- Tension test : 1.96 to 2.25N
- Operating condition : 0 to 5000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively.
- Storage condition : 0 to 95%RH and -40 to 80 degC respectively. Battery : -20 to 30 degC for long term.
- Dimensions : 136W×161D×143H[mm]excluding rubber foot.
- Weight : 2.1kg with AC adapter ADC-13, 2.5kg with battery BTR-08.
- Viewing method and display : Two CMOS cameras and 4.1" color LCD monitor.
- Fiber view and magnification : X / Y (90X magnification), or both X and Y simultaneously( 90X magnification).
- No.of splice cycles with battery : Typical 90 cycles( splice / tube heat) with BTR-08.
- Power supply : Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08.
- Electrode life : 1500 arc-discharges
- Terminals : USB 1.1( Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply.
STANDARD PACKAGE:
1pc. - Arc Fusion Splicer
1pc. - AC adapter / battery charger
1pc. - AC power cord
1 pair - Spare electrodes
1pc. - USB cable
1pc. - Quick reference guide
1pc. - Video instruction manual
1pc. - Warnings and Cautions
1pc. - J plate
1pc. - Carrying case
Optional accessories are also available:
- Battery pack
- Battery charge cord
- DC power cord
- Magnifier
- Electrodes
- Wind protector mirror