The Wind Monitor MA is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment. The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse signal without electrical contacts or slip rings. The wind direction sensor is a durable molded vane. Vane angle is sensed by a precision potentiometer housed in a sealed chamber. All materials are carefully selected for corrosion resistance and maximum durability in the harsh marine environment. Stainless steel bearings are used throughout. Special waterproof lubricant further enhances reliability. The instrument mounts on standard 1 inch pipe. Separate signal conditioning circuits are available to provide voltage or current signals when needed (see below). Each is supplied in a weatherproof junction box with mounting hardware. Specifications Range: Wind speed: 0-100 m/s (224 mph) Azimuth: 360° mechanical, 355° electrical (5° open) Accuracy: Wind speed: ±0.3 m/s (0.6 mph) or 1% of reading Wind direction: ±3 degrees Threshold:* Propeller: 1.1 m/s (2.4 mph) Vane: 1.1 m/s (2.4 mph) Signal Output: Wind speed: magnetically induced AC voltage, 3 pulses per revolution. 1800 rpm (90 Hz) = 8.8 m/s (19.7 mph) Azimuth: analog DC voltage from conductive plastic potentiometer – resistance 10K Ω , linearity 0.25%, life expectancy – 50 million revolutions Power Requirement: Potentiometer excitation: 15 VDC maximum Dimensions: Overall height: 37 cm (14.6 in) Overall length: 55 cm (21.7 in) Propeller: 18 cm (7 in) diameter Mounting: 34 mm (1.34 in) diameter (standard 1 inch pipe) Weight: Sensor weight: 1.0 kg (2.2 lbs) Shipping weight: 2.3 kg (5 lbs)