High Effeciency 200 Watt Grid Tie Power Inverter , 15V-30V Wind Power Inverter
Negotiable /Piece
Min.Order:1 Piece
Wenzhou Sunuse Electric Technology Co., Ltd.
Rechargeable Solar Powered Ventilation Fan , Hail Resistant Solar Attic Exhaust Fan
15w Adjustable Solar Powered Greenhouse Ventilation Fan With BLDC Motor
energy saving 120V 60Hz wind turbine Micro Grid Tie Inverter 300 Watt
120VAC / 230VAC IP65 waterproof solar micro grid tie inverter with Full load / Aluminum case
Professional portable restaurant Solar Powered Ventilation Fan 30W Energy Saving
200-300 Watt 120VAC / 230VAC solar panels micro inverter with MPPT
high effeciency wind power micro inverters for sale with environmental friendly
System Function
1. Display function:
A) Power failure display
LED in red
Power cut off Output failure Power grid fault DC low- voltage display(protection) DC over-voltage display(protection) Over temperature display(protection)B) Power adjust display
LED in green and steady, it means the power is locked, and the inverter works.2. voltage input(15V-30V):
1. DC voltage input:15-30VDC
2. Second level power variable voltage conversion
3. High-frequency two-way and one-way grid function:
High frequency direct modulation, AC half wave synthesis Two-way grid means: Load consume directly. And can reverse AC current transmission.4. Vector wind speed automatic control:
Adopt precise vector wind speed automatic control function. In different wind speeds, the output voltage of wind power generator is different. It means the output voltage is not stable in the long run. It’s very hard to control working condition in the steady state whether for the battery control or inverter system. Because of the unsteady voltage of the wind turbine, the inverter using load for automatic control wind power generator speed, at high speed, load increasing, at low speed, load corresponding reducing. It could make the wind power generator in a constant speed state and control the output voltage at stability of wind power generator. In the same time it could make the wind generator power of all the output to the load! Then greatly improve the efficiency of wind power and its utilization rate of increase! The experiment shows that this system could make the utilization rate of wind power up by more than 40%. And do not need to connect battery.
1. Vector wind speed automatic control: the precision is 0.1 V
2. Power lock:10W(AC output)
Product Features:
Parameter Table:
SGIN-series models |
200W |
Maximum input current ( DC ) |
8A |
DC Maximum Input |
300W |
DC maximum voltage |
30 V |
DC voltage range |
15V~30V |
Maximum output power factor |
99% |
Anti-voltage protection |
Fuse |
Output short circuit protection |
Current Limiting |
AC standard voltage range |
90V-140 VAC / 180~260VAC |
AC frequency range |
55Hz~63Hz / 45Hz~53Hz |
harmonic distortion |
THDIAC < 5% |
Phase error |
< 1% |
Islanding protection |
VAC; f AC |
Ambient temperature range |
-25 ℃ ~ 60℃ |
Humidity |
0~99% ( Indoor Design ) |
Waterproof |
Indoor Design |
Cooling |
Fan |
Electromagnetic Compatibility |
EN50081.part1 EN50082.part1 |
Power System Disturbance |
EN61000-3-2 EN62109 |
Network test |
DIN VDE 1026 |
Packing:
N.W (kg) |
0.77(200-300W) |
1.3(400—600W) |
2.0(800—1000W) |
G.W (kg) |
1.15(200—300W) |
1.8(400—600W) |
2.5(800—1000W) |
SIZE (L x W x H) |
18.7 x 12.6 x 5.1 cm |
21 x 16.5 x 5.3cm |