Product Details

Delivery Time:3-7 working days
Certification:CE,ROHS

Aluminium Alloy Shell Enphase Micro Grid Tie Inverter 600W With Full Load And MPPT

Specifications

Input /output is fully isolated to protect the electrical safety
Multiple parallel stacking
Simplify maintenance
Operation

Parameter Table:

Rated Power	200W	300W	400W	500W	600W	800W
Matched Solar Panel	Vmp: 18-21V Voc: 20-24V
DC Input Voltage Range	10.8-30V
MPPT Voltage	15-23VDC
Max DC Input Power	20A	25A	30A	35A	45A	60A
AC Output Voltage Range	120VAC (90-140VAC)or 230VAC (190-260VAC)
Frequency Range	50Hz / 60Hz
Power Factor	> 97.5%
THD	< 5%
Phase Shift	< 1%
Waterproof Grade	Indoor design
Peak Efficiency (110V)	90%	90%	88%	87%	85%	83%
Stable Efficiency (110V)	88%	87%	86%	84%	84%	81%
Cooling	Fan
Peak Efficiency (220V)	91%	90%	88%	87%	85%	85%
Stable Efficiency (220V)	89%	88%	87%	85%	85%	83%
Protection	Isolating; Short-circuit; Converse connection; Low voltage; Over voltage; Over temperature; etc.
Work Temperature	-25 centigrate to 65 centigrate
EMC	EN61000-6-3:2007 EN61000-6-1:2007
Grid Disturbance	EN50178+EN621w-O1+VDE01w-n1-12
Grid Detection	DIN VDE 1026 UL1741
Certificate	CE, ROHS

Features:

1. Perfect Pure Sine Wave Output Form
2. High utilization of solar energy by using MPPT (Maximum Power Point Tracking) technology
3. Perfect protection functions
4. Protection of wrong polarity connection to avoid the damages by incorrect operation Full power output under harsh circumstance
5. Stackable (connect in parallel for higher output)
6. Simple and safe installation

Application:

1. It is a key device of power generation system such as PV power generation system, small power wind power generation system.
2. Smart Micro inverter optimized design for modularization modular power generation systems.
3.They can be use with DC power supplies such as the mainstream solar modules, 18V, 24V and 36V monocrystal and/or Polycrystalline solar panels, small power wind generator as well as battery for converting into alternating current which suitable for feeding into utility grid.

4. Product is stable and reliable as well as high conversion efficiency. It is best choice for PV power generation systems and small power wind power generation systems

Trouble removal:

1)Red LED shows:
A) Check if the input voltage to inverter is low than 10.5V or higher than 28V.
B) Check it the AC cable connect to utility power correct or the utility power is disconnect.
2)No LED shows:
A,Check if the DC input voltage is in too low.
B,Check if the DC fuse is broken.

LED Indicator

A,Red LED:
1,Low-voltage protection (input DC voltage is less than 10.5VDC).
2,Over-voltage protection (Input DC voltage is greater than 28.5VDC).
3,Over-temperature protection (when the chassis temperature is above 75℃,

the temperature dropped about 2-10 minutes to restart automatically after cooling).
4,Fault Protection (when 110VAC or 220VAC power outage or shutdown).
5,Islanding protection: When the electric supply stop, the inverter automatically shut down output.

B,Green LED:
1,Green LED flashing: The inverter is adjusting power out