Austenitic Heat Exchanger Piping Bright Annealed Stainless Steel Round Tubing ASTM A249 TP304
Negotiable /Piece
Min.Order:1 Piece
Grade TP304 Stainless Steel Heat Exchanger Tube , ASTM A249 Stainless Steel Welded Pipe
304L Stainless Steel Heat Exchanger Tube , Stainless Steel Round Pipe Heat Exchanger Tubing
Cold Drawn Seamless Stainless Steel Tubing Heavy Wall Pipe ASME B36.19M / ASME B36 10M
ASTM A213 TP304 Stainless Steel Heat Exchanger Tube OD 5/8\'\' - 1\'\' Seamless Boiler Tubes
Bright Annealed Stainless Steel Tube ASTM A249 TP304 Tig Welding Stainless Tubing
Annealed Stainless Steel Tubing ASTM A213 TP316 Seamless Round Tube Heat Exchanger
Austenitic Heat Exchanger Piping Bright Annealed Stainless Steel Round Tubing ASTM A249 TP304
Description:
ASTM A249 / ASME SA249 - Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger and Condenser Tubes
The ASTM A249 / ASME SA249 specification covers nominal-wall-thickness welded stainless steel heat exchanger tube made from the austenitic steels. More specifically, the ASTM A249 / ASME SA249 welded stainless steel heat exchanger tube is intended for uses such as:
1. Boiler & Heat Exchanger
2. Superheater
3. Condenser
Spezilla produces welded stainless steel heat exchanger tube for heat exchanger, condenser and evaporator, in OD sizes of ½” through 4”. Manufacturing includes austenitic types such as 304L, 316L, 321, along with Duplex stainless steels such as type 2205. All stainless steel heat exchanger tube is produced in-line with length capabilities up to 60’. Wall thickness ranges from .020” up to .145” depending on the OD size.
Quality Control / Testing:
Spezilla's production of welded stainless steel heat exchanger tube follows all requirements and testing procedures per ASME/ASTM SA/A249 requirements for austenitic grades and ASME SA789 for duplex stainless types UNS31803. In addition to the in-line eddy current test, All stainles steel heat exchanger tubes are also 100% air under water tested before final packaging. OD, length and straightness are held to more stringent tolerances than what is required by ASTM or ASME and are continually checked with ring and plug gages to dimensions provided by the customer / fabricator.
Specification:
ASTM A249 Stainless Steel Heat Exchanger Tube Chemical Requirements (wt%) | ||||
Elements | TP304 | TP304L | TP316 | TP316L |
C Max. | 0.08 | 0.030 | 0.08 | 0.030 |
Mn Max. | 2.00 | 2.00 | 2.00 | 2.00 |
P Max. | 0.045 | 0.045 | 0.045 | 0.045 |
S Max. | 0.030 | 0.030 | 0.030 | 0.030 |
Si Max. | 1.00 | 1.00 | 1.00 | 1.00 |
Cr | 18.0-20.0 | 18.0-20.0 | 16.0-18.0 | 16.0-18.0 |
Ni | 8.0-11.0 | 8.0-12.0 | 10.0-14.0 | 10.0-14.0 |
Mo | - | - | 2.0-3.0 | 2.0-3.0 |
N | - | - | - | - |
Cu | - | - | - | - |
Other | - | - | - | - |
ASTM A249 Stainless Steel Heat Exchanger Tube Dimensional Tolerances | |||
Size OD | Outside Diameter(MM) | Length(MM) | Wall (MM) |
<1''(25) | 0.004 (+0.1/-0.11) |
OD < 50.8, +3.0/-0 OD > 50.8, +5.0/-0 |
10.0% |
1'' to 11/2'' (25 to 40), incl | 0.00 (0.15) | 10.0% | |
11/2'' to 2'' (40 to 50), excl | 0.00 (0.20) | 10.0% | |
2'' to 21/2''(50 to 65), excl | 0.010 (0.25) | 10.0% | |
21/2'' to 3'' (65 to 75), excl | 0.012 (0.30) | 10.0% | |
3'' to 4'' (75 to 100), excl | 0.015 (0.38) | 10.0% | |
Over 4'' to 71/2'' (100 to 200), incl | +0.015/-0.025 (+0.38/-0.64) | 10.0% | |
Over 71/2'' to 9'' (200 to 225), incl | +0.015/-0.045 (+0.38/-1.14) | 10.0% |
Applications:
Shell and Tube Heat Exchangers.