Delivery Time:10 DAYS
Certification:ISO9001:2008

EN10216-5 TC1 Stainless Steel Instrumentation Tubing Seamless Round Tube ASTM A 269 A+P OD 1/2''

Hydraulic tubes and instrumentation tubes in a comprehensive range of corrosion-resistant stainless steels and nickel alloys covering outside diameters from (OD) 1.59 to 50 mm (0.0625 to 1.968 in.). All sizes are supplied with smooth surfaces and close dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.

Standard delivery form for Spezilla hydraulic and instrumentation tube is straight lengths of 6 meters, but our tubes can also be delivered as coiled tubing, contributing to reduced installation costs.

Tubes with high cleanliness

Spezilla hydraulic tubes and instrumentation tubes are characterized by high cleanliness, and tubes with OD larger than 5 mm (0.196 in.) are delivered with plugged ends for transport protection against inside contamination.

Standards:

EN 10216-5 TC1

ASTM A213-AW (average wall)

ASTM A269

PED 97/23/EC

OD <6 mm according to A632

NACE MR0175/ISO 15156

254 SMO (UNS S31254)

EN 10216-5 TC1

ASTM A269

PED 97/23/EC

NACE MR0175/ISO 15156

UNS N08904

EN 10216-5 TC1

ASTM A213 A269

PED 97/23/EC

NACE MR0175/ISO 15156

UNS N06625

ASTM B444, Grade 1 and Grade 2

ASME SB444, Grade 1 and Grade 2

ISO 6207

UNS S32750

EN 10216-5 TC1

ASTM A789

PED 97/23/EC

NACE MR0175/ISO 15156

Austenitic stainless steels:

S34700/S34709	347/347H	1.4550/1.4912
S31635	316Ti	1.4571
S31603/S31600	316L/316	1.4404/1.4401
S31603/S31600	316L/316	1.4435/1.4436
S32100/S32109	321/321H	1.4541/1.4940
S30403/S30400	304L/304	1.4306/1.4301

Duplex stainless steels:

S32750	1.4410
S31803/S32205	1.4462
S32304	1.4362

UNS	ASTM	EN no.

Nickel alloys and high-alloy austenitic stainless steels:

N06600 Alloy 600 - N06625 Alloy 625 2.4856 N08825 Alloy 825 - N08800 Alloy 800 1.4558 N08028 - 1.4563 N08904 - 1.4539 S31254 - 1.4547 N04400 - - N02200 - - Testing of stock standard tubing in straight condition

Spezilla hydraulic and instrumentation tubing are tested according to the standards as follows.

Standard	Tests chemical analysis	Tensile	Hardness	Flattening	Flaring	Corrosion	Hydrostatic

EN 10216-5 TC1 ASTM A269 ASTM A213 ASTM A789 ASTM B66