Delivery Time:25 working days after receipt 50% deposit
Certification:CE/ ISO

           Energy Saving Smart Card Laminator , 8000 cards per hour, 400*500mm, 7 daylights

WL-FA5200ES-7 is is designed for laminating various RFID cards and electronic labels as well as Inlays. It features hydraulic pressing, electric heating, water cooling and PLC controlled. The dual-tower structure is well compact and rigid. The pressure releasing spring is applied between the top template and upper beam to realize slight contact. The temperature for heating and the pressures for cool and heat lamination are controlled through the fully-closed loop. The temperature is evenly distributed and the control of pressure is accurate. The control precision of temperature is as ±1ºC and the control precision of pressures are as ±0.1MPa.

In order to meet the special lamination demands of high-end cards, the process of hot template rising can be set into 1 to 7 sections as per specific technological requirements and the time for staying at each

section can be flexibly set.

Hot lamination has 12 grades and cool lamination has 5 grades. The interface of man-machine dialogue adopts a touch screen which is simple and direct.

                             Perfect performance with high quality!

 ♦ Laminating Method:using Single Cylinder Jacks Up To Maintain Balance Automatically, Controlled With Double Pumps Cooperating With Import Pressure Module By Frequency Conversion, Multilevel Pressure,With Equality And Invariableness Pressure And High Precision
♦ Heating Method:use Heater To Heat Up And The Temperature Can Be Controlled In Many Sections,The Parameter Of Every Section Can Be Set.
♦ Temperature Control Method: The PLC Work With The Temperature Control Module To Realize The Invariableness Control For The Temperature Basis The Parameter Set In Every Section.
♦ Cooling Method:cooled By Frost Water Cycle Disposed By Chiller(The Frequency Of The Stream Amount Can Be Controlled),Saving Energy And With Good Effect.
♦ Hot-Pressed Vacuum System Can Be Added As The Clients Need To Ensure The Good Laminating Effect

♦ A Attached Material Feeding Machine Can Be Added As The Clients Need To Ensure The High Material Feeding Efficiency
♦ Use Imported Aluminium Laminating Board, Alloy, The Transfer Of Heat Is More Balanced

♦ Designed with seven daylights, increasing 20% card productivity more than laminator with daylights & achieving faster heating speed and better quality.

Technical Parameters:

Model	WENLIN-FA5200ES-7 Energy Saving Laminator
Electrical Configuration	Imported (Schneider & Omron Brand)
Energy Saving Device	Energy saving automatic door for hot tower
Cooling Method	Water cycling cooling ； Seven pipes for water inlet and seven pipes for water outlet
Heating Method	Electric heating
Pressure	Heating 12 stages / cooling 5 stages
Pressure Precision	±0.05 Mpa
Temperature Precision	±1(℃)
Laminating Plate Smoothness	±0.05mm
Heating Plate	Imported aluminum alloy
Laminating Plate Thickness	45mm
Daylight Thickness	50mm
Hydraulic Cylinder for Each Tower	Four
Laminating Plate Size	420mm×520mm
Laminating Daylight	Seven
Voltage	380V 60HZ/ 26KW
Dimension	2300mm×630mm×1800mm
G.W	2,500 KGS
Productivity	about 8,000 cards/hour
Suitable for	RFID cards,IC/ID Contact cards, Contactless cards, Bank dual interface cards, Gold & Silver Commemorative Cards,etc.