Delivery Time:about 15 working days
Certification:CE
Limplus Window Blind Ultrasonic Cleaning Machine With Ultrasonic Rinsing Tank 3.6KW Power
Application of Limplus ultrasonic cleaner in blind field:
Wood Blinds
Vinyl Blinds
Venetian Blinds
Vertical Blinds
Micro Mini Blinds
Luminettes
Roller Shades
Pleated Shades
Shades
Shutters
Blind ultrasonic cleaner theory:
Traditionial cleaning method is use brush by hand to clean it one by one, but this cost lot of time and huge labor cost.
Ultrasonic transmit sound througn the water/liquid and this causes microscopic bubbles to form on the surface of anything in the solution. The bubbles then grow like a ballon until they implode. Millions of bubbles explode at same time to clean the blinds.
Ultrasonic cleaning technology accomplish the cleaning task within seconds, only 15~30seconds per blind.
Specification:
| Model No. | LS-14402 (With double tank) |
| Ultrasonic Tank | 3000x220x500mm |
| Rinsing Tank | 3000x220x500mm |
| Unit size | 3200x680x950mm |
| Wooden case size | 3300x750x1100mm |
| Ultrasonic Power | 3600W / ultrasonic tank |
| Total ultrasonic power | 7200W |
| Heating power | 12KW / tank |
| Timer | 1~99min adjustable |
| Frequency | 40KHz |
| Ultrasonic Tank capacity | 330L / tank |
| Optional | Drying rack, Drying tray, Air bubble |
| Tank material | SUS304 or SUS316L |
| Warranty time |
1 year |
Model LS-14402 equipped with ultrasonic transducers for both tanks.
Rinsing tank is for residual chemical clean to avoid damage for blinds.
Features:
1. Extend the life of blinds.
2. minimize the use of manual labor
3. Save time and labor cost, make hands free.
4. Clean hard to reach areas of products and remove all types of dirt.
5. Expand your current business via provide cleaning service to customers.
FAQ:
Q.: What cleaning solution should I use?
A.: Advanced cleaning solutions are made up of a variety of detergents, wetting agents and other reactive components. A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece
Q.: When should I change the solution?
A.: Cleaning solutions should be replenished when a noticeable decrease efficiency, or if the solution is visibly dirty. A fresh batch of solution for each cleaning session is optional.
