Surface Planed / Grooved 75mm Styrofoam Insulation Board for Cold Chain Logistic Truck
USD $70 - $160 /3 /Set
Min.Order:1 Set
50mm Thickness Light Yellow Styrofoam Insulation Board Approved ISO MA
High Density X350 Extruded Styrofoam Sheets in Decoration Panel 1220mm Width
700Kpa CO2 Extruded Styrofoam 50mm Polyurethane Insulation Board for Highspeed Railway Base
High Compression 900Kpa CO2 XPS Insulation Board , Extruded Styrofoam Sheets for Wind Blade
38 Kg/M3 Planed & Grooved Extruded Styrofoam Sheets for Cold Chain Logistic Truck
350 Kpa, 2400 X 1200MM, Extruded Styrofoam Sheets , Structural Insulated Panels
Nanjing Ourgreen Surface Planed / Grooved, 75mm Thickness, Styrofoam Insulation Board for Cold Chain Logistic Truck
Nanjing Ourgreen Styrofoam Insulation Board in Cold Chain Logistic Truck
In the past, people tend to use Polyurethane to manufacture Cold Chain Logistic Truck. Nowadays,
more and more customers use Ourgreen XPS board as substitution to Polyurethane in this regard,
for the fact that XPS bears following reasons:
Long-term Thermal Resistance: almost 99% Closed Pores gain advantage over PU as 80%;
Excellent Water Resistance: The closed cell structure makes XPS nearly Waterproof, hence it avoids
water leakage, penetration, frost and condensation;
High Compression Strength: The 150 to 700 Kpa Compression enables XPS to bear any high load
against goods; Stable Chemical Property: XPS Board does not age, decompose, hence there were no
hazardous substances produced. It is totally safe to transport goods.
Nanjing Ourgreen Styrofoam Insulation Board in Cold Chain Logistic Truck Applicaton
Nowadays Cold Chain Logistic Van is more and more popular in transporting Fish, Meat, Vegetables,
Ice Cream and etc. The Thermal Insulation Efficiency has become the key factor of such vans.
Usually XPS for such use is Surface Planed and Grooved. And in this case good thickness precision
must be ensured. Ourgreen will remove natural skins of XPS by Surface Planing Machine, reaching
a thickness precision of ±0.5mm.
The Grooves help air be driven out during the Vacuum Process, in this way, excellent Adhesion between
XPS Foam Board and other facing layers is ensured.
A special glue for sticking XPS with other materials is mandatory. We are able to offer you such glue.
Nanjing Ourgreen Styrofoam Insulation Board Physical Parameters:
Items |
Value |
Conditions |
Compression Strength |
400 Kpa |
Tested at 10% deflection |
Thermal Conductivity |
0.027 W/(m.k) |
At 25 ℃ |
Water Absorption |
≦ 1.0% |
V/V |
Water Vapor Permeability |
≦ 3.0 ng/(m.s.Pa) |
23℃ ±1℃ RH 50%±5% |
Working Temperature |
-50℃ to + 75 ℃ |
|
Dimensional Stability |
≦ 1.5% |
70 ± 2 ℃ 48h, 90%RH |
Creep |
≦ 5% |
80 ± 2℃ 48h, 20Kpa |
Fire Resistance |
B2 |
Self-extinguishing |
Ourgreen Styrofoam Insulation Board Packing Details:
Thickness (mm) |
Width (mm) |
Length (mm) |
Pcs/Pack |
M2/Pack |
75 |
1200 |
2400 |
4 |
11.52 |