RO-0.5A 1.5Kw Cooling Capacity Air-Cooled Water Chiller With 7C Outlet
Description :
1. RIOU air-cooled chiller without water-cooling tower for easier installation and higher mobilit. it is favorable there is lack of water supply or when water-cooling tower is not applicable.
2. Low noise fan motor provides excellent cooling and condensation effects. the throttle unit is stable and finished with high-grade anti-rust treatment.
3. It equipped with a powerful compressor imported from U.S which operats smoothly and quitely.
 
1. Compressor
RIOU use the famous compressor, like Bizer, Copeland, Danfoss, SANYO, Taiwan Hanbell and Taiwan Fu Sheng, to ensure the quality. RIOU believes that diversified choices can meet most of the clients.
Usually, RIOU will use scroll compressor for small-medium cooling capacity, screw compressor for large cooling capacity and piston compressor for low temperature working situation
The output power of screw compressor can be controlled automatically by control system. Furthermore, there are four phases for choosing: 0%-25%-50%-75%-100%. And the motor of the screw compressor is star delta start.
2. Control Panel
Normally, scroll chiller is equipped key control panel with LED display and screw chiller is controlled by touch screen (human-machine interface). You can choose Punp (usual), Siemens or Mitsubishi brand. According to your needs, the chiller can be long-range controlled. 
3. Condenser
RIOU air cooled scroll chiller adopts finned type condenser; screw chiller adopts brass sleeve corrugated aluminum fin type condenser. The refrigerant will be cooled down here by the fan. Usually, the fan is on the top of the chiller. But it can also be on the side of the chiller according to your special needs.
Please notice that the finned condenser can be corroded by corrosive gas. Therefore, you’d better choose water cooled chiller or you should find a way to avoid the corrosive gas contact with condenser. If the local environment is windy and dusty, the chiller should be equipped dust gauze to protect condenser.
Some clients don’t want the chiller’s quantity of heat be emitted in the workshop. In consideration of this situation, we can separate the condenser from the chiller. So that the cooling part works inside the workshop while the heat dissipation part works outside. 
4. Evaporator
You can choose coil tube type or shell and tube type. Shell and tube type evaporator is more efficient than coil tube type. If you choose coil tube type evaporator, the chiller should be equipped a water tank. The chiller will need a water supplement tank according to some situations too. 
In consideration of corrosive liquid, the evaporator can be titanium coil tube type or stainless plate type. 
5. Water Pump
The water pump type will be decided by your needs. For example, if the chiller needs to cool corrosive liquid, it’ll need a chemical pump.
6. Water Tank
RIOU can provide different capacity of water tanks for clients to keep the liquid temperature in the water tank.
 
 

 
 
 
To give you our best offer one time,please indicate when sending requirement:
1.What is the cooling capacity you need?
2.Air cooled or water cooled?As you see,water cooled need a separated cooling tower .
3.What is the outlet water/glycol/seawater temp you need?
4.What is the power supply?
5.Do you need water pump,water tank together?
6.Is there any special requirement for the refrigerant?R22,R134A,R407C,R404A or other?
 
Welcome to contact  vivian@rozl.com!