1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine

512MB DDR2 RAM and 2GB NAND Flash

LCD/Touch Screen, HDMI, TV out, Audio support

SDIO, USB Host/OTG support

Ethernet, WiFi, serial port, G-Sensor, GPIO

Contains CPU board and motherboard

Linux 2.6.35 & Android 2.3 support (Android 4.0 will be supported; includes test demo)

 

HardWare

CPU Module-CM-Tiny210V2 CPU module

1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine

512MB DDR2 RAM, 32-bit data bus, 200 MHz

MLC NAND Flash: 2GB

Two 60-pin and two 30-pin 2.0mm spaced DIP connectors for mounting to motherboard

Ethernet Chip: DM9000AEP

Audio Codec Chip: WM8960

Four user LEDs (green)

Supply voltage from 2V to 6V

CPU module dimensions: 74x 55 x 11mm

Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

Mother board

We provide the Tiny210V2SDK mother board for CM-Tiny210V2 CPU board.

 

 

1. Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port, and one was lead by SCON interface

2. AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera 

3. Expand MiniPCI interface: expand 3G Module

4. Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level

5. keys: 8 key

6. RJ45 Ethernet port: using DM9000AEP(On CPU board), 10/100M adaptive

7. Audio input and output: using the WM8960 professional audio chip(On cpu board), containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output

8. USB Slave: 1 Road, the USB 2.0 specification

9. Buzzer: 1, control by the PWM0

10. EEPROM: AT24C08 (256 Byte) for I2C test

11. LCD Interface: 2 LCD interface, support 3.5 "-19" full color TFT display LCD

12. Capacitive touch screen: I2C-based interface, on the 45Pin LCD connector

13. Resistive touch screen: 1-wired Touchscreen interface, On 40Pin LCD connector

14. SDIO interface: used to connect the SD WiFi module and other

15. CMOS Camera interface: used to connect CMOS camera

16. RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)

17. Gravity sensor Support

18. PCB layer: 2

19. PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module

20. Power supply: DC-5V

For more details,please refer to: /Tiny210V2-S5PV210.html
Email: sales@armdevs.com
Website: