800A100V pipeline heating special high frequency switching power supply
Negotiable /Piece
Min.Order:5 Pieces
GuangDong KingArms Technology Co., Ltd.
General technical specifications of high frequency switching power supply
800A100V design model
one、Power Types
1,Power types:High-frequency Switching Power Supply
2,Model and specifications:Depends on output current and voltage
3,Cooling mode:Water Cooling/air cooling
4,Switch tube type:IGBT,
5,Rectifier type:Diode rectification
800A100V design drawing
two、Input Characteristics
1,Rated Input Voltage:Three-phase,AC380V±10% ,50HZ
2,Rated Input Power:Current*Voltage
3,Rated Input Current: Current*Voltage*1.8
4,Input Power Factor:COSΦ≥0.95
5,Circuit breaker:3P Selection according to output power
three、Output Characteristics
1,Output Voltage:DC 0-rated voltage
2,Output Current:DC 0-rated current
3,Stabilized Current Precision:≤1%(Rated Current)
4,Stabilized Voltage Precision:≤1%
5,According to accuracy:1A,0.01V
6,Current ripple factor:≤6% or ≤3%(I≥50%Id)(Id: Rated Current)
7,Rated Output:η≥90%
Four、Environmental Conditions
1,Installation site:Indoor installations
2,Altitude:≤2000m
3,Ambient temperature:-20℃~45℃
4,Relative humidity:≤90%
5,Dust gas:No influence
five、Control Mode
1,Operating mode:Touch screen control
2,Display mode:Digital display
3,Accommodation mode:Digital Regulation
4,Soft start:Yes
5,Remote Communication:RS485 Communication interface
six、Requirement about water condition
1,Water temperature (℃):Inlet water temperature: 25~35℃,Note In order to prevent the formation of condensation water, the water temperature is the best around 28 ℃ (and the environment temperature is not more than 5 ℃)
2,Water pressure (MP):The difference between the inlet pressure and the outlet pressure > 0.1MP; the maximum inlet pressure ≤0.4MP.
3,PH value:6~8
4,Conductivity (us/cm):≤50us/cmSoft water/deionized water
5,Water volume (ton/hour):About 4.34ton/hour
seven、Power Unit
1,Power Unit:Customized design according to the specific situation of the customer's site
Eight、Main Body Structure
1,Main Body Structure:Structure of vertical combined cabinet
Nine、Weight
1,Net weight:Depends on overall output power
ten、 External Dimension
1,Height*Width*Depth:Customized design according to the specific situation of the customer's site(The actual value is subject to the agreement)
eleven、Input Cable
1,Copper wire:Depends on overall output power
twelve、Output Electrical Connections
1,Made of Cu:Made of Cu
Thirteen、Protection Characteristics
1,Self-protective function under the abnormal situations such as over/Low-voltage, over-current, default phase,short circuit, overheating and so on
fourteen、Other Characteristics
1,Insulation class:B level
2,Protection class:IP42(Unit module)
3,Noise:≤50dB
4,Operational State:Operational State Products can be continuously full-load operated