Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Specifications

Monitoring parameters	CO2	Air Quality (VOC)	Temperature	Relative humidity
Sensing element	Non-Dispersive Infrared Detector (NDIR)	Semiconductor mix gases sensor	Digital combined temperature and humidity sensor
Measuring range	0~2000ppm(default) 0~5000ppm (selectable in the order)	0~30ppm	0℃~50℃(32℉~122℉) (default)	0~100%RH
Display Resolution	1ppm	5ppm	0.1℃	0.1%RH
Accuracy@25℃(77℉)	±50ppm + 3% of reading	-------	±0.4℃ (0℃~50℃)	±3%RH (20%-80%RH)
Life time	15 years (normal)	5～7 years	10 years
Calibration cycle	ABC Logic Self Calibration	-------	---------	--------
Response Time	<2 minutes for 90% change	<1 minute (for 10ppm hydrogen, 30ppm ethanol) <5 minute (for a cigarette) in 20m2 room	<10 seconds to reach 63%
Warm up time	2 hours (first time) 2 minutes (operation)

Electrical Characteristics
Power supply	24VAC/VDC
Consumption	3.5 W max. ; 2.5 W avg.
Analog Outputs	Two or three analog outputs 0~10VDC(default) or 4~20mA (selectable by jumpers) 0~5VDC (selected at place the order)
Modbus RS485 interface	RS-485 with Modbus protocol, 19200bps rate, 15KV antistatic protection, independent base address

Conditions of Using and Installation
Operation conditions	0~50℃(32~122℉); 0~95%RH, non condensing
Storage conditions	0~50℃(32~122℉)/ 5~95%RH
Weight	320g
Installation	Fixed on the air duct with 100mm installation hole size
IP class of the housing	PC/ABS IP50 for models without LCD; IP40 for models with LCD
Standard	CE-Approval

Features

Designed for real time detecting carbon dioxide, air quality, temperature or relative humidity in air ducts.NDIR infrared CO2 sensor inside with special Self Calibration and up to 15 years’ lifetime. It makes CO2 measurement more accurate and reliable.Mix gases sensor with high sensitivity for VOCs from new furnitures, wall coverings, office equipment, cleanser etc. and other pollutants from smoking and cocking etc.Combined temperature and humidity digital sensor provides a high accuracy measurement in full range.Provide up to 3 analog outputs (0~10VDC or 4~20mA or 0~5VDC) for CO2, air quality (VOC) and temperature or relative humidity.Modbus RS485 interface with outputs for CO2, temperature, humidity and air quality (VOC).With LCD or without LCD selectableLCD display real-time measurements of CO2, air quality (VOC), temperature and relative humidity.Simple and smart design and installation of sensor probe with a water-proof and porous filmExtendable probe meets more air duct systems24VAC/VDC power supply.EU standard and CE-approval.

Application

Residential houses, exhibition halls, restaurants, shopping malls, sports gymnasiums, conference rooms, etc.

Museums, theaters, offices, classrooms, train stataions, airports, etc.

Dimensions and Mounting

Models Guide

TG9- X 1 8 2 L – Y 02/05 E –Tab

X: analog output
      3- 3Xanalog outputs for CO2 + Air Quality (VOC) + Temp. /RH (selectable by jumpers)
      2- 2xanalog outputs for CO2 + Air Quality (VOC)
      0- no analog output

1: Modbus interface (with outputs for real-time measurement of CO2+ Air Quality (VOC) +Temp. +RH)

8: CO2 sensor code

2: Air Quality (VOC) sensor code

L: LCD display
     No L indicates no LCD
Y: Analog output type
     A- 4~20mA   (selectable via jumpers)
     V- 0~10VDC (default)
     V5- 0~5VDC (NOTE: If 0~5VDC is chosen, then options of 0~10VDC or 4~20mA will not be