Delivery Time:3-5 business days

IDM-480GNET optical transmission equipment can transmit two 1000Mbps Ethernet networks simultaneously. The optical interface supports simple ALS function, code of E1 interface is HDB3 which meets all the international standards. Provide 2 Ethernet networks with physical isolation sharing 1000Mbandwidth. It also has perfect monitoring and alarm function, high degree of integration, low power consumption, stable performance and 220VAC/-48VDC power supply alternative. It can be widely used in the mobile base stations, remote module of the switch and DDN private network and etc.

 1.Features of 16E1+1Gigabit PDH Multiplexer

Provide 2 Ethernet networks with physical isolation sharing 1000M bandwidth.

Provide standard 16E1 transmission

Support E1 loopback of COT (central office terminal) and RT (remote terminal), easy to test and manage.

Optical interfaces with 1+1 channel protection.(Either one fails, the other will back it up)

NMS interface optional (RS232/Ethernet).

2. Specifications of 16E1+1Gigabit PDH Multiplexer

2.1 Power Supply

220VAC/-48VDC

Consumption: 40W±10%

2.2 Optical interface

Rate	1.25Gbps±50ppm	Wavelength	1310nm/1550nm
Physical connector	FC/SC	Sensitivity	Better than -36dBm

2.3 E1 interface

Channels	16	Rate	2.048Mbps±50ppm
Comply with	ITU-T G.703, G.823, G.742	Code	HDB3
Impedance		75 unbalanced and 120 balanced

2.4 1000M Ethernet interface

Rate	1000Mbps, 10M/100M/1000M auto-negotiation
Comply with	IEEE802.3, 10/100Base-TX and 1000Base-FX
Duplex	Full/Half auto-negotiation

2.5 Operating Environment

Temperature: 0ºC~40ºC

Humidity: 90% (non- coagulation)

2.6 Dimensions

      440mm×230mm×45mm (Width × Depth × Height)