KDL Cable-Fault Detector

Main Feature:

1. It can test under 35KV all cable’s high-low faults, widely used.

2. It adopts the latest international technology “Multiple pulse method”, also has the traditional

Shock high voltage flashover method and low voltage impulse method.

3. It is easy to analyze when shows the simple which similar like the low voltage impulse shortcut  

fault waveform characters of any high resistance fault. It has the convenient software and English menu and touch screen to operate.

4.  Fault detection rate, test accuracy and method are better than most test equipment.

5. Big LCD screen to display

6. It has the strong data handing capacity and friendly display interface

7. It has the safe high voltage protection solution, and not dead or damage under the high

voltage pulse environment.

8. The standard print port, reliable and simple operate.

9. Built-in power, can test cable’s open circuit and low resistance shortcut fault under no external

power supply.

Parameter:

1.Test method: multiply pulse method , impulse high voltage current sample method, low pulse

method

2.High voltage test: <42KV

3.Data sampling speed: 96MHz,, 48MHz, 24MHz, 12MHz

4.Measured distance: 16KM

5.Readout resolution: 0.1m

6.System test accuracy: <500px

7.Test cable length: short distance(<1KM) Middle distance<3KM, long distance>3KM, 3 kinds test

pulse amplitude: about 600VP-P

8.It can show the multiple pulse sending and Fault reflection signal automatically, make the fault character waveform easily, all the high resistance fault waveform only has one result, which is the low voltage impulse shortcut fault waveform characters.

9.Storage the test waveform function. It can save the scene test waveform in the requested order, which can supply to compare any time, no limited.

10.Fault waveform is displayed and compared with the correct phase whole open circuit waveform in the screen, make to analyze more correctly.

11.Built-in power supply, continuous working 1hr after full-charged, and can standby more than 1.2hrs, and also can connect with the external AV power to work at the same time.

12.Working situation: Temperature -10℃~45℃, relative humidity: 90%, atmospheric pressure 750±30mmHg