Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

ML30C-PD 1 x 30w DALI & PUSH DIM led driver multi-output current compact design 103 x 67 x 22mm

Description

Built-in DALI interface and PUSH DIM function,user can choose either DALI dimming or PUSH dimming accroding to their application requirements.Multi output current 250mA to 700mA selectable via DIP switch,one driver is applicable for many luminaires,save purchasing cost and inventory qty for customer..Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207Compact size design 103 x 67 x 22mmMemory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.Maximum length of the cable, from push button to last driver is 20mPress-in terminals in primary and secondary side, easy assemblyProtection: Short circuit / Over voltage / Over temperature5 years guaranty

Mechanical Specification

Specifications

INPUT	Input voltage	220-240Vac
Input frequency	50-60Hz
Input current	0.16A max
Power factor	≥0.90
Efficiency(Note1)	≥85%
Leakage current	＜0.5mA/240Vac
OUTPUT	Output current and load	250mA 16-60Vdc 15W max, 350mA 16-60Vdc 21W max 400mA 16-60Vdc 24W max, 450mA 16-60Vdc 27W max 500mA 16-58Vdc 29W max, 550mA 16-55Vdc 30W max 600mA 16-50Vdc 30W max, 700mA 16-43Vdc 30W max
Output load range	1x30W max
Current accuracy	±5%
Dimming mode	DALI, PUSH
ENVIRONMENT	Working temp.(Ta)	-20~50℃
Surface temp.(Tc)	85℃max
Working humidity	20~90%RH non-condensing
Storage temp.	-40~80℃
Life time	≥50000hours
PROTECTION	Isolation class	Class II, SELV
Protection class	IP20
Short circuit	Protection type; auto rest
Over voltage	Protection type; auto rest
Over temperature	Protection type; auto rest
SAFETY&EMC	Safety	EN61347-1 EN61347-2-13
EMC	EN55015, EN61000-3-2ClassC
EN61000-3-3, EN61547
DALI interface	IEC62386-101, IEC62386-102, IEC62386-207
Approvals	CE
Withstand voltage	IN-OUT:3.75KVAC/5mA/1min
NOTE	1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp.

Output current selection

Wring Diagram