Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Waterproof 50 Watt 1-10V Dimmable LED Driver 850mA For Down Light

Description:

1, Multi output current 350mA to 1050mA selectable via DIP switch.

2, Primary and secondary dimming with PUSH button.

3, Secondary dimming with 1-10V dimmer.

4, Dimming mode easily switched by Jumper.

5, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains

restores.

6, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.

7, Maximum length of the cable, from push button to last driver is 20m

8, Press-in terminals in primary and secondary side, easy assembly

9, Protection: Short circuit / Over voltage / Over temperature

10, 5 years guaranty

Specifications

INPUT	Input voltage	220-240Vac
Input frequency	50-60Hz
Input current	0.26A max
Power factor	≥0.90
Efficiency(Note1)	≥87%
Leakage current	＜0.5mA/240Vac
OUTPUT	Output current/voltage and load	350mA 16-60V DC 21W max 500mA 16-60V DC 30W max 550mA 16-60V DC 33W max 650mA 16-58V DC 41W max 700mA 16-58V DC 41W max 750mA 16-56V DC 43W max 850mA 16-56V DC 47W max 900mA 16-56V DC 50W max 1050mA 16-48V DC, 50W max
Output load range	1x50W max
Current accuracy	±5%
Dimming mode	1-10V, PUSH
ENVIRONMENT	Working temp.(Ta)	-20~50℃
Surface temp.(Tc)	85℃max
Working humidity	20~90%RH non-condensing
Storage temp.	-40~80℃
Life time	≥50000hours
PROTECTION	Isolation class	Class I, SELV
Protection class	IP20
Short circuit	Protection type; auto rest
Over voltage	Protection type; auto rest
Over temperature	Protection type; auto rest
SAFETY&EMC	Safety	EN61347-1 EN61347-2-13 EN60598-1 EN60598-2-6
EMC	EN55015, EN61000-3-2ClassC
EN61000-3-3, EN61547
Approvals	SEMKO, CE
Withstand voltage	IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min
OUT-FG:500VAC/5mA/1min
NOTE	1, Efficiency is measured at 1050mA/48Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp.