Ceiling Mount Wireless Motion Sensor MC003V/ CP + MW01 1200W with ISM Wave Band

Description

Feature

1. Used in wireless networking of luminaries, easy installation and free of wire.

2.  With fixed code, very easy to step up any-to-any communication.

3. By digital receiving and transmitting method, high anti-interference capability and no interference to an RF sensitive device, for example, electronic keys of cars.

4. With advanced code detection technology, no code missing.

5. Merrytek takes the lead in using the rotary coding switch in RF transceiver, very easy to create groups.

6. MC003V/CP is an active motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials.

7. MW01 is an innovative and unique wireless transceiver with frequency range 433MHz. Due to use full digital receiving& transmitting and fixed address code for creation of groups, it has high reliability and stability.

8. The RF module integrates advanced code check technology, significantly improved transmission reliability. Make sure exact signal transmitting and receiving, no code missing.

9. Merrytek takes the lead in adopting the rotary coding switch to set up groups, very simple to achieve any-to-any communication.

Product Information

Function

RF Wireless Control

Motion detector MC003V/CP + RF wireless transceiver  MW01 + 1-10V dimmable LED driver (Any brand)

Any-to-any communication

Once any motion is detected, the motion signal will be transmitted to other grouped sensors through RF transceiver. See example below. When the person walks to one of floors, the lamps in adjacent floors will switch on at a preset low light level synchronously.

Point-to-multipoint communication

In addition, MC003V/CP and MW01 can be used in cluster-control. See below picture, there are several exits / entrances to the corridor. Any sensor (Master) in the exits / entrances is triggered, all lamps in the corridor light up. 

RF grouping (up to 16 different groups possible)

Thanks to digital communication method and fixed address code, the module has high anti-interference capability and no interference to any RF sensitive device, for example, electronic keys of cars.The RF transceiver can meet following communication modes

1/ Any-to-any communication

2/ Directional communication

3/ Broadcast communication

Each RF transceiver has 1 TXD and 2 RXD. TXD channel is used for transmitting RF signal and RXD channel is used for receiving the RF signal. Only need to set the same address code in TXD and RXD, the RF modules can automatically set up group. Address code can be easily set via rotary coding switch. See below examples.

Specifications:

MC003V/CP: