Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

YG8 Tungsten Carbide Wear Parts Solid Rods Ground Finished for Wear Resistance

Tungsten carbide rods are mostly applied for end mill and drill with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with Sub-micron grain grade YG6X, and for fibreglass reinforced plastics, titanium alloys, hardened steel with Ultra-fine grain grade YG8X, ect.

Brief Introduction of Carbide Solid Rods:

Standard Available: GB, ANSI etc.

Recommended Grade for tungsten carbide rod: YG6, YG8, YG6X, YG012, YG013, YG8A etc

Tungsten carbide rod applications include drill bits, end mills, and reamers. Custom diameters and length are also available in these grades as well as metric sizes

Spcecification: φ3--30mm Length: 330mm

Advantages of Tungsten Carbide Rods:

100% raw material.
Size standard as per your requirements
Professional suggestion on products
Fully adopted in advance technology and equipment
Professional manufacture for tungsten carbide items
Fully adopted in advance technology and equipment
Quality Control System and strict inspection

Dimensions and Tolerance of Standard Carbide Rods Blanks:

Dimension & Tolerance
D diameter (mm)	L1 Length〔mm〕	L2 Length〔mm〕	D Diameter Tolerance	L Length Tolerance
Dia. 1mm – 4mm	310	330	+0.15 ~ +0.60	+0.00 ~ +10.00
Dia. 5mm – 10mm	+0.20 ~ +0.70
Dia. 11mm- 35mm	+0.25 ~ +0.80

D Diameter 〔mm〕	D Diameter Tolerance 〔mm〕	L Length 〔mm〕	L Length Tolerance〔mm〕
D<3	+0.15 ~ +0.60	L<50	+0.00 ~ +3.00
50≤L<100	+0.00 ~ +3.50
3≤D<10	+0.20 ~ +0.70	100≤L<200	+0.00 ~ +(L×3%)
D≥10	+0.25 ~ +0.80	L≥200

Carbide Rods Material Grades:

Grade	Applications
YG6	Good hardness and normal strength, for drawing of steel and non-ferrous metal and alloy bars or tubes under the condition of higher Stress.
YG6X	High wear resistance and high hardness,for drawing of steel wires and non-ferrous metal wires or alloy bars under low-stress condition.
YG8	High wear resistance and high hardness,for drawing and straightening steels,non-ferrous metal and alloy bars and tubes; And for fabricating of machine parts,tools and wear parts,such as nozzles,centres,guiding devices,upsetting dies and perforating tools.
YG8X	Good strength and impact toughness; suitable for plates,bars,saws,seal rings,tubes etc. And it is one of the most popular grade for wear parts.
YG15	High Strength and impact toughness, but lower hardness and wear resistance.For drawing steel rools and pipes under high stress condition;And also for upsetting dies and perforating tools under higher impact loading.
YG20	Used as wear parts,sheets and some mechanical components.
ZK10UF	Fine-grained alloy, good wear resistance and high strength.It is one of the most popular grade for rods,bars,tubes and other wear parts, which need high wear resistance and good cautery resistance and low impact toughness.
ZK30UF	Fine grain grade. Excellent wear resistance, high in strength and impact resistance. Suitable for rough machining of cast iron,non-ferrous metals,nonmetallic materials and heavy cutting.
YG6N	Good wear resistance and cautery resistance, high strength and