900Hz 5.5KW 380V High Speed Spindle Inverter Drive For CNC Machine

Scope: 

 Engrave for Wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working

Specifications:

Connect mode: ER32
Tool holder’s diameter: 2-20mm(Factory standard: 2 fillings)
Taper hole of spindle runout: ≤0.003mm
Mandrel runout: ≤0.008mm
Lubricating mode: grease
Cooling mode: water
Imported bearings with good quality, long working life.
Spindle mode: NYM140-9-18Z/5.5
Spindle parametric:                                    Overall size(mm):
Frequency: 900Hz                                       D: 140
Rotating speed: 9000-18000rpm                         D1: 110
Power: 5.5Kw                                           L: 330
Voltage: 380V                                           L1: 42
Electric current: 10.5A                                   L2: 50
Bearings mode: 2*7009   2*7005
Weight: 39KG

Description:

It adopts two-pole to six-pole motor-driven system and the spindle is made by the nickel chromium molybdenum alloying steels through standard heat treatment program to reach the requirement of high accuracy and stability. Assemble and install area’s temperature is controlled by the thermostatic air conditioner within accurate fit tolerance. The assemble and install step is adjusted according to standard correction program when tightening the nut and is tightened by torque wrench within criterion, which make us not to correct the spindle by adjust the nut. Our high speed motor spindle utilizes hydraulic pull weights imported from German to measure the spindle’s pull accurately. The spindle leaving the factory is promised to run all for an integral test process so that the time of machine tool manufactors’ running time and machine tools delivery time could all be shortened.The GDZ High Speed Motor Spindle researched and developed by our company has low noise and high accuracy characteristics. Depth of parallelism within 0.002mm and Perpendicularity within 0.002mm are necessary. Balance test should use the computerized balancer machine to check the precise balance of spindle with full speed.

Applications:

Applicable scope: This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for the circular carving and drilling and milling of the hardware, glassworks and woodworks.

Competitive Advantage:

High rotating speed used for engraving and milling or fine machining. This product has wide application.Constant power spindle with low rotating speed and high torque; Low rotating speed used for drilling and milling or rough machining; The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better. The durable years of the Bearings gets more longer.