Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Heat-resisting 0.8KW 220V CNC Milling Spindle For Moulding Machine 24000rpm

Features:

1. high precision
2. Spindle motor  adopts imported ceramic ball bearings, heat-resisting!withstand voltage!!!
3. 4bearings,and all bearings is High speed angular contact bearings!
4. Main use: advertising engraving machine, woodworking engraving machine, CNC machine, small processing center, high speed centrifuge, and so on.

Notes for Use of Motor Spindle:

 In the process of saving and transporting motor spindles, the high speed grease in the bearings could  be changed. So before using, the spindles should run in low speed for a period time at first. Running  must start from the minimum speed of the spindle and add speed to differential growth by 3000rpm after  30 minutes. Each level is run in 20 minutes. If just start using in high speed without running, abnormal  noise and heat would happen then the using life will be shortened. In the long-term use of the electric  spindle, it should be working(in low speed) at least 15 to 30 minutes within one week.  The spindle should rotate in the specific direction.  The spindle using gas seal should dry and filter its gas source by the water oil separator before using.  Cooling water calculate by 1 liter per kilowatt minute. The minimum flow rate of cooling water is not less than 5 liters per minute. 

 
Specifications:

Cooling mode: water

Tool holder’s diameter:0.5-7mm(Factory standard: 2 fillings)
Taper hole of spindle runout :≤0.003mm
mould woodworking cnc router

Spindle mode:NYM62-24Z/0.8
Spindle parametric:                                    Overall size(mm):
Frequency:400Hz                                       D:62
Rotating speed: 24000rpm                              D1:47
Power:0.8Kw                                           L:200
Voltage:220V                                           L1:10
Electric current:5A                                      L2:23
Connect mode:ER11
Mandrel runout :≤0.008mm
Lubricating mode: grease
Bearings mode:2*7002   1*7001
Weight:4KG

Description:

GDL80 series Motor Spindle is the automatic tools changing spindle designed by our company. It adopts four-pole motor-driven system and the ISO20 knife handle, could usually be used in the quick processing of different materials with Φ3~Φ10 blade from 24000rpm to 30000rpm. The multichamber protective measure including double-layer sealing device and air sealing conformation can efficaciously provide liquid from getting in and keep Motor Spindle working for a long time. The GMN import bearings and engine oil are used to ensure high performance of the spindle. Tool changing structure is advanced so that the signal and tool changing movement could be reliable and stable.

Applications:

Applicable scope: This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for the circular carving and drilling and milling of the matrix, spectacles and jewelry.

Competitive Advantage:

 Little vibration, good stability, Low noise, high processing precision  Adopt the ceramic core Aerial plug, more safe and reliable  Infinitely variable speed transmission for frequency changer with wide speed range