Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Labor Cost Saving EPS Cement Sandwich Panel For Exterior Wall Reuseable

Description:

1) Composition: cement and EPS polystyrene form as core, calcium silicate board as face panel on both sides.

2) Sizes:

Length (mm)	Width (mm)	Thickness (mm)	Density (kg/m2)	Application	Appearance
2270 2440 3000	610	50	38±5	Non-load bearing wall of houses and buildings	With calcium silicate board as face board, solid
60	42±5
75	45±5
90	52±5
100	56±5
120	62±5
150	72±5
180	85±5
200	95±5

Specifications:

Name	Size(mm)	Weight(Kg)	Packing(pcs/m2/20\'GP)
EPS Cement Sandwich Panel	2270*610*60	45-48	315pcs/436m2
2270*610*75	50-53	252pcs/349m2
2270*610*90	55-58	207pcs/287m2
2270*610*100	60-65	189pcs/262m2
2270*610*120	65-75	153pcs/212m2
2270*610*150	80-90	126pcs/175m2
2270*610*180	95-105	99pcs/138m2

Advantages:

Sound Insulation	The inside of wall panel material (EPS polystyrene grain) has fine sound insulation and sound-absorbing functions.
Easy to Install	Using our installation material (EPS Foam and Cement Adhesive) is easy to build house
Shorter Time	For a 50sq. house, using Eps and Cement sandwich wall panel, three people can finish it within ONE day, while using traditional block, it will take at least SEVEN days with ONE WEEK to finish.
Labor Cost Saving	As wall panel is easy and fast to construct.

Application:

A) Interior & Exterior Wall 

Can automatically adjust indoor air and water content with the season and climate changes, which can keep the 

temperature at an invariable temperature level, and such ecology effect just goes with the tide of modern residential 

building. It is widely applied to various modular house, low buildings, apartment, villas, and city house, etc.

B) Interior Partition 

With EXCELLENT fireproof, best hanging force, sound insulation, heat insulation, waterproof, easy installation 

and the like characteristics.

C) Floor  

Can be innovatively used as floor board. This system has the outstanding advantages such as high load-bearing 

capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, 

corrosion resistance, no deformation, no split, etc.

D) Roof 

This system not only solves the problem of roof leakage, but also has the advantages such as heat insulation, 

neat joint surface, high temperature resistance, etc.

Installation Steps:

1) Setting the line and carrying the board into position	Eject double lines of board thickness up and down the axes of installed wall board, and easily carry to the side of wall according to the specification needed;
2) Sawing board	Using a hand-hold electric saw freely according to the specification of wall, which can reduce the loss rate;
3) Sizing	Sizing the bump slots and then spread the baseline and the bump slots with the Boyuejia special adhesives;
4) Installation	Carrying the board prepared to be installed to the installation place, correcting the wall board by gavelock and making it close tightly, and let the polymer mortar squeeze out into full and fixing it with a chock temporarily;
5) Correcting and fixing	Using the guiding rule