Delivery Time:3-5 days
Certification:CE,FCC,MSDS

EPS Foam Concrete Sandwich Wall Panel For Prefabricated Homes
 
Specifications:

Name	Size(mm)	Weight(Kg)	Packing(pcs/m2/20\'GP)
EPS Cement Sandwich Panel	2270*610*60	45-48	315pcs/436m2
2270*610*75	50-53	252pcs/349m2
2270*610*90	55-58	207pcs/287m2
2270*610*100	60-65	189pcs/262m2
2270*610*120	65-75	153pcs/212m2
2270*610*150	80-90	126pcs/175m2
2270*610*180	95-105	99pcs/138m2

Advantages:
 
Are you still working in dirty and wet construction site, moving many heavy machines to the site? Are you still waiting for more than half a year before you can move inside to your new house? Are you still paying high salary to the workers and still unhappy about the final work? Are you still...?
 
You are so lucky to be here and get to know the best construction materials---eps cement sandwich panels. Comparison with other wall materials, this one is more stronger and 70 years long lifespan with following details:

Heat Preservation	Major material for wall panel is anti-freezing, heat preserving and environmental friendly.
Fire Proof	Both face sides with 5mm calcium-silicon fire proof board, thus Eps and Cement sandwich panel can be against a high temperature of 1000°C for 4 hours.
Water Proof	Tests has proved that water containers can be made by Eps and Cement sandwich panel without absorbing functions and no leakage at all.
Heat Insulation	Adjust the indoor temperature at a constant range.

Description:

EPS & Cement Sandwich Panel is a kind of lightweight energy saving wall material, which uses cement calcium silicate or reinforced calcium silicate board as face panel, filled with cement, EPS polystyrene foam particles, and as core material and forming by one time compound. 
 

1) Composition:

2) Sizes:

Length (mm)	Width (mm)	Thickness (mm)	Density (kg/m2)	Application	Appearance
2270 2440 3000	610	50	38±5	Non-load bearing wall of houses and buildings	With calcium silicate board as face board, solid
60	42±5
75	45±5
90	52±5
100	56±5
120	62±5
150	72±5
180	85±5
200	95±5

Installation Process:

1) Setting the line and carrying the board into position	Eject double lines of board thickness up and down the axes of installed wall board, and easily carry to the side of wall according to the specification needed;
2) Sawing board	Using a hand-hold electric saw freely according to the specification of wall, which can reduce the loss rate;
3) Sizing	Sizing the bump slots and then spread the baseline and the bump slots with the Boyuejia special adhesives;
4) Installation	Carrying the board prepared to be installed to the installation place, correcting the wall board by gavelock and making it close tightly, and let the polymer mortar squeeze out into full and fixing it with a chock temporarily;
5) Correcting and fixing	Using the guiding rule of two meters to check the verticality and leveling correction. Then using 6mm or 8mm reinforcing steel bar and ribs adding with construction sealant to fix;
6) Grouting and filing starch	Using BOYUEJIA speicial adhesives to fill the gaps between the corrected wall boards after one day later. Then putting the chock out and letting the corrected wall smoothly with polymer mortar;