Sewage source heat pump unit

Cooling capacity: 400-1744KW

Heating capacity: 388-1680KW

Compressor: Imports semi-closed screw (selected by requirements)

Refrigerant: Environmental protection Refrigerant (selected by requirements)

Power: 3/N/PE   AC380V/220V   50HZ/60HZ (changed by requirements)

Product Features

1. Sewage as cold and heat resource, using heat pump technology to develop the low-grade energy to high-grade energy.

2. Through "intermediate heat exchanger" to provide hot and cold source for unit. The quality water directly into the heat pump for heat exchanging, then the sewage flows trunk sewer downstream. The whole process has been in a closed water piping and equipment, only the extraction of heat, without consumption of water.

3. It is not restricted by hot-cold balance from the building to make sewage to treasure without drilling and pipe. It can supply for all types of building heating, cooling and living hot water.

4."Big difference in temperature, low flow" design.

5. Unit using a range of water source temperature 7℃-30℃.

6. Applications:

Sewage treatment plant and the surrounding, gray water treatment plant and the surrounding, trunk sewers and sewage is adequate near the building.

Note:

1.Unit heating capacity and compressor power consumption calibration conditions:   Cooling water inlet temperature 12℃, the water temperature is℃.                      Dirty water inlet temperature 27 ℃, outlet water temperature 31℃.

2.Unit heating capacity and compressor power consumption calibration conditions:    Hot Cooling water inlet temperature 40℃, the water temperature is 45℃;                         Dirty water inlet temperature 9 ℃, outlet water temperature 5℃.

Contact: 0086-1509497-7989  0086-536-5119006  sales01@sdlvte.com