GSM Base Station In Mobile Communication Huawei BTS3012 DDPU M900-C 21023151771081000730
Negotiable /Kilogram
Min.Order:1 Kilogram
Beijing Keynote Telecom Technology Limited
Huawei BTS In Telecommunication DFCB EGSM 900 212714006310A9100062
Huawei Base Station BTS 3012 Filter Combiner Unit DFCU EGSM900 21271400511079000531
Micro Base Station Huawei BTS3012 DSAC Extended Signal Access Card 028262D095001118
GSM Base Station Huawei BTS3012 DTMU Support external GPS input 030BMY1085001007
21023150761079005015 GSM Micro Cellular Base Station Huawei BTS3012 DTRU M900
GSM Base Stations Cabinet Huawei BTS3900 DCDU-03B 21021204726TBA908539
GSM Base Station In Mobile Communication Huawei BTS3012 DDPU M900-C 21023151771081000730
[Product Description]
DDPU
· Double density dual duplex unit - DDPU,In the RF front-end system of the DAFU frame, with DCOM mixed interpolation.
· DDPU is a must match module, normally DDPU full configuration is 3 block, 1 block is the minimum configuration. If you do not configure DCOM, DDPU can be equipped with up to 6 pieces.
· Multiple RF signal from transmitter by the diplexer is sent to the antenna.
· The received signal from the antenna amplifier and a four to the receiver in the DTRU.
· Antenna standing wave detection signal output coupling.
· Low noise amplifier control.
· Antenna lightning protection.
DDPU indicator light
Indicator light |
Color |
Explain |
State |
Meaning |
RUN |
Green |
Operation and power on indicator |
lighting |
The power is input, single plate problems. |
lighting off |
No power input, or single board fault working state. |
|||
Slow flash(0.5Hz) |
That single board has according to the configuration of the running, in working condition. |
|||
Fast flash(2.5Hz) |
DTMU is the DDPU sending configuration. |
|||
ALM |
Red |
Alarm indication lamp |
Lighting(Contains high frequency flicker) |
Alarm status (including standing wave alarm), indicate the existence of fault. |
lighting off |
No fault. |
|||
Slow flash(0.5Hz) |
Said single board is to start or load program. |
|||
VSWRA |
Red |
A channel wave alarm indication lamp |
lighting |
The A channel has a standing wave alarm or severe standing wave warning. |
lighting off |
A channel without standing wave alarm. |
|||
VSWRB |
Red |
B channel wave alarm indication lamp |
lighting |
The B channel has a standing wave alarm or severe standing wave warning. |
lighting off |
B channel without standing wave alarm. |
DDPU External interface
Interface |
Type |
Explain |
COM |
DB26 female connector |
To the DDPU module provides the control signal, communication signal, clock signal and the frame number. |
POWER |
3V3 power adapter |
The power input. |
TXA |
Type N male connector |
TX signal input DTRU transmission, DCOM signal input. |
TXB |
Type N male connector |
TX signal input DTRU transmission, DCOM signal input. |
RXA1 |
SMA female connector |
The main set of 1 output port. |
RXA2 |
SMA female connector |
The main set of 2 output port. |
RXA3 |
SMA female connector |
The main set of 3 output port. |
RXA4 |
SMA female connector |
The main set of 4 output port. |
RXB1 |
SMA female connector |
Diversity of 1 output port. |
RXB2 |
SMA female connector |
Diversity of 2 output port. |
RXB3 |
SMA female connector |