Industrial C2H2 / SO2 / CO2 / Oxygen Air Separation Plant 330KW 50HZ

Industrial C2H2 / SO2 / CO2 / Oxygen Air Separation Plant 330KW 50HZ

Negotiable /Piece

Min.Order:1 Piece

Supply Ability:
0 Piece / Pieces per Month
Payment Terms:
T/T L/C D/P D/A
Delivery Detail:
7 days

Quick Details View All >

Place of Origin:
China
Model Number:
KDON-350/800

HANG ZHOU TAI LIAN CRYOGENIC EQUIPMENT CO., LTD.

Business Type: Trading Company
Main Products: Air Separation Plant ,Acetylene Plant ,Compressed Gas Cylinder

Product Details

Delivery Time:60working days after received your payment
Certification:ISO9001;2008 CE CERTIFICATE

99.6% Air Separation Plant Industrial KDON-350/800 Oxygen Plant With Low Energy Consumption

Atmosphere pressure       96kPa(A)
Atmosphere tempt.    25℃
Relative humidity 75%
O2 contained in air    20.95%O

Annual average tempt.                                18.4℃
Max. Tempt.                                       45℃
Min. Tempt.                                        -15℃
Average tempt. in Summer                           25℃
Average tempt. in Winter                             -15℃

Earth shake :  <6 Mcalli degree

 Sea level:       425m

 Impurity in atmosphere:
CO2       ≤300 ppm
SO2       ≤0.44 mg/m3
H2S       ≤2.3 mg/m3
CH4       ≤5.2mg/m3
C2H2     ≤0.03 ppm
CnHm(Except C2H2)     ≤5 ppm
Dust content       ≤10mg/m3

1.6 Recycling water

Inlet tempt.   30℃
Inlet pressure      0.4 MPa(G)
Max. pressure drop    0.2 MPa(G)
Max. tempt. rising       10℃
Turbidity of cooling water   12 mg/L
PH value       7.2

Total hardness       2.5
Fouling factor 0.0004 m2 hºC/ kW

       Water consumption: 180T/h Recycling water   ~25T/h(not incl. O2 compressor)

Power supply
HV power supply               10kV±5%
LV power supply                380V/220V±5%
Frequency                      50±0.5Hz

     Loaded power                      ~330KW(Name plate not iccl.

O2compressor)

2.  Main technical parameters

2.1 Output and purity, pressure(out of the cold box)

O2 output                             350m3/h±5%

O2 purity                             ≥99.6%O2

O2 pressure                           ~0.034MPa(G)

N2 output                             800m3/h±5%

N2 purity                             ≤10ppmO2

N2 pressure                           ~0.012 MPa(G)

Product output status(at 0℃,101.325Kpa)

 Start pressure                        0.65MPa(G)

 Continuous operation period between two defrosting times   12months

 Start time                            ~24 Hours

Specific power consumption            ~0.64kWh/mO2(not incl. O2 compressor)

3. Process description:

KDON-350/500 air separation plant is of low pressure process.

Raw air comes from air, goes through air filter for removal of dust andother mechanical particle and  enters non-lub air compressor to be compressed by two stage compressor to approx.  0.65MPa(g).It goes through cooler and enters precooling unit to be cooled to 5~10℃. Then it goes to switch-over MS purifier for removal of moisture, CO2, carbon hydrogen.  Purifier consists of two molecular sieve filled vessels. One is in use while anther is under regeneration by waste nitrogen from the cold box and through heater heating.

After purified, small part of it is used as bearing gas for turbine expander, other enters cold box to be cooled by reflux(pure oxygen, pure nitrogen and waste nitrogen) in main heat exchanger. Part of air is abstracted from the middle part of main heat exchanger and goes to expansion turbine for production of cold. Most of expanded air goes through subcooler which is cooled by oxygen from upper column to be delivered to upper column. Small part of it goes through bypass to waste nitrogen pipe directly and is reheated to go out of the cold box. The other part of air continues to be cooled to near liquid air tempt to lower column.

In lower column air,air is separated and liquified as liquid nitrogen and liquid air. Part of liquid nitrogen s abstracted from the top of the lower column. Liquid air after subcooled and throttled is delivered to the middle part of upper column as reflux.

Product oxygen is abstracted from the lower part of upper column and reheated by expanded air subcooler, main heat exchange. Then it is delivered out of column. Waste nitrogen is abstracted from the upper part of upper column and is reheated in subcooler and main heat exchanger to go out of column. Part of it is used as regeneration gas for MS purifier. Pure nitrogen is abstracted from the top of the upper column and is reheated in liquid air , liquid nitrogen subcooler and main heat exchanger to be delivered out of the column.

Oxygen out of the distillation column is compressed to customer.

4. Scope of supply:

Air non-lub. compressor          2 sets

    Air discharge                1320 m³/h

    Normal operation pressure                ~0.70 MPa

    Total power loaed             132 KW

Dim.                2650×1600×1800 mm

Scope of supply:

.1 Main machine                             

2 Spare parts                         1 x2

3,Oil spray filter  1 Pc

 Air precooling unit        1 Group

     T

Contact Supplier

Mr. Yao junming sale Manager Chat Now
Telephone
86-571-87290354
Mobile
86-13805714891
Fax
86-571-87290996
Skype
junming205
Address
M.12011202, BUILDING A, DONG FANG MANSION Yulin,Shaanxi

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Machinery > Industry Laser Equipment > Laser Engraving Machines
Categories
Hi~