Delivery Time:10 working days after received your payment
Certification:ARI ,CE，ISO9001,ISO14001,OHSAS18001，CRAA,CQC

EKDB 250A(R) - EKDB 350A(R) high static pressure duct type air conditioning unit

Specifications:

Technical data sheet

Unit model	Indoor unit	EKDB 250A	EKDB 250AR	EKDB 300A	EKDB 300AR	EKDB350A	EKDB350AR
Outdoor unit	2xEKAA 125AB	2xEKAA 125ARB	2xEKAA 150AB	2xEKAA 150ARB	2xEKAA125AB +EKAA100AB	2xEKAA125ARB +EKAA100ARB
Nominal cooling capacity	W	64000	60000	80000	78000	85000	85000
Nominal heating capacity	W	--	64000	--	90000	--	93000
Indoor unit	Air flow	m3/h	13600	13600	15300	15300	17850	17850
External static pressure	Pa	200	200	200	200	200	200
Fan drive mode		V-belt transmission
Width x depth x height	mm	1719x965x736
Weight	kg	2242x1059x746	2242x1059x898	2022x1199x1546
Outdoor unit	Compressor model		Fully hermetic volute
Width x depth x height	mm	2x990x840x1840	2x1290x840x1840	3x990x840x1840
Weight	kg	2x270	2x285	2x285	2x300	2x270+265	2x285+280
Power supply	380V/3N~/50Hz
Rated input power of integrated unit	Cooling	W	25100	24490	35560	34215	31600	33000
Heating	W	--	19500	--	29000	--	28600
Rated current of integrated unit	Cooling	A	45	44	61	60	66	67
Heating	A	--	41	--	56	--	63
Refrigerant	Type		R22
Connection pipe	Connect mode		Soldering
External diameter of liquid tube	mm	2x15.88	2x15.88	3x15.88
External diameter of air tube	mm	2x28.6	2x34.9	3x28.6
Condensed water drainage pipe		R1
External electric heater box	Model		ACDB-EH6, ACDB-EH8, ACDB-EH10, ACDB-EH12.5, ACDB-EH15, ACDB-EH20, ACDB-EH25, ACDB- EH30, ACDB-EH38, ACDB-EH45, ACDB-EH55
Description		You can select an external electric heater box according to the required heating capacity. For specifications of external electric heater boxes, see P22.

Note:
■ The rated cooling capacity is measured in the following condition: The indoor air dry bulb reads 27°C, the wet bulb reads 19°C, and the
outdoor dry bulb reads 35°C. The condition for the rated heating capacity is as follows: The indoor air dry bulb reads 20°C, the outdoor dry
bulb reads 7°C, and the wet bulb reads 6°C. The cooling capacity and heating capacity change according to the conditions. During model
selection, you need to select a proper model based on local climatic conditions.
■ External static pressure indicates the static pressure under the nominal air flow. The static pressure may change depending on customer
requirements. For the specific value, see the reading on the nameplate.
■ The unit input power and current are based on the standard external static pressure. If the customer requires a different external static
pressure, check the nameplate on the unit for the power and c