Delivery Time:15 working days after received your payment
Certification:AHRI ,CE，ISO9001,ISO14001,OHSAS18001，CRAA,CQC

Eco-friendly Heat Pump Package Unit -Air Cooled Modular Combination

Specifications:

Model		EKAC 220BR1	EKAC 440BR1	EKAC 660BR1	EKAC 880BR1
Unit combination	Master unit	EKAC220BR1M	EKAC220BR1M	EKAC220BR1M	EKAC220BR1M
slave unit	--	EKAC220BR1S	2*EKAC220BR1S	3*EKAC220BR1S
Nominal cooling capacity	kW	63	126	189	252
USRT	17.92	35.84	53.76	71.68
×104kcal/h	5.42	10.84	16.26	21.68
Nominal heating capacity	kW	68	136	204	272
USRT	19.34	38.68	58.02	77.36
×104kcal/h	5.85	11.7	17.55	23.4
Nominal cooling input power	kW	19.0	38	57	76
Nominal heating input power	kW	19.8	39.6	59.4	79.2
Power supply		380-415V/3Ph/50Hz
Refrigerant	Type		R410A
Control		Electronic expansion valve
Compressor	Type		Fully hermetic scroll compressor
Lubricant		Grease (POE-160SZ)
Qty.	Set	2	4	6	8
Fan	Type		Axia fan with large blade and low noise
Qty.	Set	2	4	6	8
Water side heat exchanger	Type		High efficiency vacuum brazed plate type
Water flow for cooling	m3/h	10.8	21.6	32.4	43.2
Water flow rate in heating mode	m3/h	11.7	23.4	35.1	46.8
Water pressure drop	kPa	43	43	43	43
Recommended diameter for general inlet/outlet water pipe	inch	≥2	≥3	≥3	≥4
Power cable specification	Section area of live line	mm2	≥10	≥35	≥70	≥95
Qty. of live lines	3
Section area of null line	mm2	≥4
Qty. of null lines	1
Section area of grounding line	mm2	≥10	≥16	≥35	≥50
Qty. of grounding lines	1
Dimensions	L x H	mm	2012×1840
Width	mm	880	2125	3370	4615
Unit weight	Net weight	kg	515	1030	1545	2060
Operating weight	kg	525	1050	1575	2100

■ Test conditions for nominal cooling capacity: outlet water temperature 7°C; water flow: 0.172m3/(h·kw); outdoor ambient temperature 35°C.Note:

■ Test conditions for nominal heating capacity: outlet water temperature 45°C; water flow: 0.172m3/(h·kW); outdoor dry/web bulb temperature 7°C/6°C.

■ Water resistance at the air conditioner side includes water pressure drop of the unit and the attached Y strainer.

■ Main Pipes of combined units need to be customized and installed on site. The diameter of the pipes must meet design requirements. EK does not provide the pipes.

■ Modular units can be formed using the 1 - 16 basic