Delivery Time:7-15 working days
Certification:ISO9001, ISO14001, TS16949, CE, FCC, ROHS

I2C Projective Capacitive Touch Screen 8 inch PG Projected five Points ROHS

Quick Detail:

Cover PET+ITO Glass+FPC Surface Hardness: 3H Interface: I2C Work Voltage: 2.8V-3.3 V Operating System: Android / Linux Light Transmittance: ≥87％

TP Specification:

Model No.	SCT-P80-105328A
Size	8 inch
View Area	181.1 x 104.4 mm
Structure	Cover PET + Sensor Glass
Cover PET	0.25mm
Sensor Glass	1.1mm
Total Thickness	1.45±0.15mm
FPC	Pitch=0.5mm
Surface Hardness	3H
Connection	COF
IC Model	GT911
Multi Touch	5 Points
Interface	I2C
Transmittance	≥87%
Working Voltage	2.8-3.3V
Operating System	Android / Linux
Operating temperature	-20℃～70℃, ≤90%RH
Storage temperature	-30℃～80℃, ≤90%RH

LCD Specification:

Item	Specification
Display Area (mm)	174(H) x 104.4(V)    8.0-inch diagonal
Number of Dots	800 x 3(H) x 480(V)
Pixel Pitch (mm)	0.2175(H) x 0.2175(V)
Color Pixel Arrangement	RGB vertucal stripe
Display Mode	Normally white
Number of Color	262K(6bit/color), 16.7M(8 bit/color)
Luminance(cd/㎡)	1000
Viewing Angle (CR≥10)	-80～80°(H) , -80～80°(V)
Surface Treatment	Anti-glare and hard-coating 3H
Electrical Interface	LVDS (6 bit/8 bit)
Viewing Direction	Higher Contrast ratio: 6 o’clock    Less gray scale reversal: 12 o’clock
Module Size (mm)	192.0 (W) x 122.0 (H) x 8.9 (D)
Module Mass (g)	TBD
Backlight Unit	LED, edge-light, Unreplaceable

Assembly Precautions:

Do not exert extra force to touch panel. Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners. When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen. When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel. Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen. Please don\'t pull FPC with force from side to side, because the FPC tension will make FPC burst. If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove. In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case.

About Us

Main Structure:

■ GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.
 
■ PG structure
PG structure uses one PET film plus sensor glass solution. Ma