Delivery Time:7-15 working days
Certification:ISO9001, ISO14001, TS16949, CE, FCC, ROHS

COB USB Touch Panel Controller Board , 10 Points Capacitive Multi-Touch Screen

Quick Detail:

ITO Sensor + Cover Glass + FPC Interface: USB IC Model: FT321+9257 Work Voltage: 2.8V-3.3 V  Application: Tablet PC

Touch Panel Specification:

Model No.	SCT-GA0-004777A
Structure	GG
Size	10.1 inch
Connection	COB (with Controller Board)
IC Model	FT321+9257
Interface	USB
Operating System	Win 7/ 8
View Area	213.2 x 160.4 mm
Outline Dimension	228.4 x 183 mm
ITO Glass	0.55mm
Cover Glass	1.1mm
Pitch	0.5mm
Total Thickness	1.85±0.1mm
Multi Touch	10 Points
Transparent	≥87%
Surface Hardness	6H
Operating temperature	-20℃～70℃, ≤90%RH
Storage temperature	-30℃～80℃, ≤90%RH

Main Structure:

 GG structure

GG structure is cover glass plus sensor glass technology solution, with high transmittance, good effect of protecting scratch and also harder than PG structure.

 OGS structure

OGS is one glass solution, directly form ITO conducting film in the protective glass and use the sensor technology. It has the advantage of the simple structure, light, thin and good transmitting etc.

 PG structure

PG structure uses one PET film plus sensor glass solution. Mature process technology greatly reducesthe failure rate and cost. It has the same level weight with OGS structure.

Application:

Tablet PC (MID) Household appliance Bank system Smart home system Industrial equipment All In One (AIO) Car navigation (GPS) Smart phone Ultra book Education electronics

Environment Condition:

Item	Value
working environment	-20℃～70℃, ≤90%RH
storage environment	-30℃～80℃, ≤90%RH

Mechanical Characteristics:

Item	Value
finger contact area	Φ≥5mm
transmittance	≥87%

Electric Characteristics:

Item	Value
working voltage	DC2.8~3.3V
insulation resistance	＞20M, DC25V
working current	12mA~14.5mA
response time	≤16ms

Reliability Condition:

Item	Condition
high temperature and humidity	60℃, 90%RH, 96H
high temperature storage	70℃/120H
thermal shock	-20℃(0.5H)~+70℃(0.5H) by 100 cycles

Assembly Precautions:

Do not exert extra force to touch panel. Since touch panel is transparent and clear, make sure to wear fingerstall or glove before touching. Be careful of your hands and other parts from injury at handling by glass corners. When handling, make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen. When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel. Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen. Please don\'t pull FP