Delivery Time:7-15 working days
Certification:ISO9001, ISO14001, TS16949, CE, FCC, ROHS

Five Points Capacitive Multi-Touch Screen 7 inch High Resolution for MID

Quick Detail:

Cover Glass + ITO Glass + FPC Sensor  Process: Printing + Laser IC: GT911 (COF) Interface: I2C Working Voltage: 2.8-3.3 V Transmittance: ≥87%

TP Specification:

Model No.	SCT-G70-005662A
Structure	Cover Glass + ITO Glass
Cover Glass	0.7 mm
ITO Glass	0.4 mm
Surface Hardness	6H
Size	7 inch
Outline Dimension	111.34(L) x 186.84(W) mm
Active Area	91(L) x 154.6(W) mm
IC Model	GT911
Connection	COF
Interface	I2C
Working Voltage	2.8-3.3V
Operating System	Android
Transmittance	≥87%

LCD Specification:

Item	Specification
LCD size	7.0 inch(Diagonal)
Driver element	a-Si TFT active matrix
Resolution	1024 × 3(RGB) × 600
Display mode	Normally White, Transmissive
Dot pitch	0.05(W) × 0.15(H) mm
Active area	153.6(W) × 90.0(H) mm
Module size	165.75 (W) ×105.39(H) ×3.4(D) mm
Surface treatment	Hard Coating, Glare
Color arrangement	RGB-stripe
Interface	Digital
View direction (Gray Inversion)	6 O’Clock
Backlight power consumption	1.6W (Typ.)
Panel power consumption	0.35W (Typ.)
Weight	TBD(Typ.)

Assembly Precautions:

Do not exert extra force to touch panel. In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case. Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners. When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen. When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel. Please don\'t pull FPC with force from side to side, because the FPC tension will make FPC burst. Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen. If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove.

About Us

Main Structure:

■ GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.
 
■ PG structure
PG structure uses one PET film plus sensor glass solution. Mature process technology greatly reduces the failure rate and cost. It has the same level weight with OGS structure.
 
■ OGS structure
OGS uses one glass solution, directly form ITO conducting film in the protective glass and use the sensor technology. It has the advantage of the simple structure, light, thin and good transmitting etc.

Main Material:

IC: from Taiwan, America etc. Film: from Japan, Korea etc.  Glass: from Japan, America, Germany etc.

Application:

Smart phone Car navigation (GPS) Tablet PC (MID) Education electronics Ultra book All In One (AIO) Household appliance Bank system Smart home system Industrial equipment

Environment Condition:

Item	Value