Product Details

Delivery Time:7-15 working days
Certification:ISO9001, ISO14001, TS16949, CE, FCC, ROHS

6.0\'\' PC Touch Screen Panel Cover Glass 5 Points Android System

Touch Panel Specification:

Model No.	SCT-G60-005371A
Size	6.0 inch
View Area	132.13 x 74.59mm
Outline Dimension	164.7 x 81.1mm
Structure	Cover Glass + Sensor Glass
Cover Glass	0.55mm
Sensor Glass	0.4mm
Surface Hardness	6H
Connection	COB
IC Model	GSL915
Transparent	≥87%
Working Voltage	2.8-3.3V
Operating System	Android
Operating temperature	-20℃～70℃, ≤90%RH
Storage temperature	-30℃～80℃, ≤90%RH

Main Structure:

■ GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.

■ PG structure
PG structure uses one PET film plus sensor glass solution. Mature process technology greatly reduces the failure rate and cost. It has the same level weight with OGS structure.

■ OGS structure
OGS uses one glass solution, directly form ITO conducting film in the protective glass and use the sensor technology. It has the advantage of the simple structure, light, thin and good transmitting etc.

Main Material:

IC: from Taiwan, America etc.
Film: from Japan, Korea etc.
Glass: from Japan, America, Germany etc.

Application:

■ Smart phone
■ Car navigation (GPS)
■ Tablet PC (MID)
■ Education electronics
■ Ultra book
■ All In One (AIO)
■ Household appliance
■ Bank system
■ Smart home system
■ Industrial equipment

Environment Condition:

Item	Value
working environment	-20℃～70℃, ≤90%RH
storage environment	-30℃～80℃, ≤90%RH

Electric Characteristics:

Item	Value
working voltage	DC2.8~3.3V
insulation resistance	＞20M, DC25V
working current	12mA~14.5mA
response time	≤16ms

Mechanical Characteristics:

Item	Value
finger contact area	Φ≥5mm
transmittance	≥87%

Reliability Condition:

Item	Condition
high temperature and humidity	60℃, 90%RH, 96H
high temperature storage	70℃/120H
thermal shock	-20℃(0.5H)~+70℃(0.5H) by 100 cycles

Assembly Precautions:

1, Do not exert extra force to touch panel.
2, Since touch panel is transparent and clear, make sure to wear fingerstall or glove before touching.
Be careful of your hands and other parts from injury at handling by glass corners.
3, When handling, make sure to hold the touch panel borders not center parts to avoid dirt to touch
panel. Do not lift touch panel by tail to avoid tail loosen.
4, When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel.
5, Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert
extra force to tail tip and cause tail loosen.
6, Please don\'t pull FPC with force from side to side, because the FPC tension will make FPC burst.
7, If there is air groove on touch panel, when design product structure, make sure no liquid and powder
near the air groove.
8, In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling
gap between touch panel and case.