Small PC USB Touch Panel Multi - Touch Points , 9 Capacitive Touch Screen
USD $1 - $30/ /Meter
Min.Order:1 Meter
9\" Android Touch Screen GG Structure 10 Touch Points TS16949
Capacitive Touch Screen Panel Cover Glass Plus Sensor Glass Structure , Multitouch Panel
FCC 8 inch Android I2C Touch Screen Photo Etching Sensor Process
GG Structure I2C Touch Screen Interface IIC for Education Electronics
Multi Tablet Touch Panel GT911 for Smart home system , Ultra Book Touch Screen
GG Structure Android Touch Screen I2C Port , Capacitive Multi - Points Touch Panel
Small PC USB Touch Panel Multi - Touch Points , 9 Capacitive Touch Screen
Touch PanelSpecification:
Model No. |
SCT-G90-005441A |
Structure | GG |
Sensor Process | Printing + Laser |
Size | 9 Inch |
Active Area |
194.92 x 122.2mm |
Outline Dimension |
241.6 x 152.6mm |
ITO Glass | 0.55mm |
Cover Glass | 0.70mm |
Work Voltage | 2.8V-3.3V |
Connection | COB |
Transparent |
≥87% |
Surface Hardness | 6H |
Operating temperature |
-20℃~70℃, ≤90%RH |
Storage temperature |
-30℃~80℃, ≤90%RH |
Main Structure:
■ GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.
■ OGS structure
OGS uses one glass solution, directly form ITO conducting film in the protective glass and use the sensor technology. It has the advantage of the simple structure, light, thin and good transmitting etc.
■ PG structure
PG structure uses one PET film plus sensor glass solution. Mature process technology greatly reduces the failure rate and cost. It has the same level weight with OGS structure.
Main Material:
IC: from Taiwan, America etc.
Glass: from Japan, America, Germany etc.
Film: from Japan, Korea etc.
Application:
Smart home system Industrial equipment Car navigation (GPS) Education electronics Household appliance All In One (AIO) Tablet PC (MID) Smart phone Ultra book Bank systemEnvironment Condition:
Item |
Value |
working environment |
-20℃~70℃, ≤90%RH |
storage environment |
-30℃~80℃, ≤90%RH |
Mechanical Characteristics:
Item |
Value |
finger contact area |
Φ≥5mm |
transmittance |
≥87% |
Electric Characteristics:
Item |
Value |
working voltage |
DC2.8~3.3V |
insulation resistance |
>20M, DC25V |
working current |
12mA~14.5mA |
response time |
≤16ms |
Reliability Condition:
Item |
Condition |
high temperature and humidity |
60℃, 90%RH, 96H |
high temperature storage |
70℃/120H |
thermal shock |
-20℃(0.5H)~+70℃(0.5H) by 100 cycles |
Assembly Precautions:
Do not exert extra force to touch panel. Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen. Since touch panel is transparent and clear, make sure to wear fingerstall or glove before touching. Be careful of your hands and other parts from injury at handling by glass corners. When handling, make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen. When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel. Please don\'t pull FPC with force from side to side, because the FPC tension will make FPC burst. If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove. In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case.