Slot Mill Finished 6063-T5 Aluminium Door Frames Profiles With Cutting
Negotiable /Meter
Min.Order:1 Meter
Indoor And Outdoor Imperforate C Shape Aluminium Strip Ceiling With Wood Grain
GPS Aluminium Mini Mobile DVR For Vehicles Full D1 Recorder G-SENSOR
Black Anodized Aluminium Profile For Windows And Doors, 6063-T5
Home Garden Wicker Lazy Chair With Powder Coated Aluminium Frame
Auto Plastic Sealing Machine Non Woven Bag Making Machine 10pcs/min - 20 pcs/min
Detailed Product Description
Product Name: | Wood Grain Aluminium | Alloy: | 6063,6060,6463 |
Material : |
Aluminium Alloy |
Surface Treatment: |
Mill Finished, Anodizing, Electrophoresis, Powder Coating, Polishing, Wooden grain, Sand blasting |
Deep Process : | Milling, Drilling ,Bending, Cutting | Temper: | T5,T6,T66 |
Mill Finished 6063-T5 Aluminum Door Frames Profiles , With Cutting
Description:
Material | 6063 6060 6463 T5 T6 T66 |
Surface | Mill Finished, Anodizing, Electrophoresis, Powder Coating ,Polishing, Wooden grain, Sand Blasting |
Color | Clear Satin, Bronze, Black, Golden, Silver, other colors for Powder Coating |
MOQ | 1ton. Usually 12 tons for a 20 feet container; 24 tons for a 40 feet container. |
Length |
For Anodizing and Electrophoresis: Maximum 6.8 Meters For Powder Coating : Maximum 12 Meters |
Packing | 1) EPE, waterproof paper wrapped in small bundles. 2) paper interleave each piece and packing in wooden box and finally on Steel Rack to pull into container |
Sample delivery | Two weeks (one week for mould +one week making sample) |
Sample design | It is better we can get your drawing or sample, we mainly make according to your design, and we can keep confidential for your design. |
Maximum extruder machine | 3500 tons; Minimum extruder machine: 500 tons |
Competitive Advantage:
1)Engineering design and support.
2)Deep process: cutting,punching,drilling,milling,and fabricating.
3)High Quality system, aluminum profile comply with GB, ASTMB and EN standard.
Primary Technical Data
1) Chemical composition
Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti |
6063 | 0.2~0.6 | 0.45~0.90 | <0.35 | <0.10 | <0.10 | <0.10 | <0.10 | <0.10 |
6060 | 0.3~0.6 | 0.35~0.60 | 0.1~0.3 | ~ | <0.10 | <0.15 | <0.05 | ~ |
6463 | 0.2~0.6 | 0.45~0.90 | <0.15 | <0.20 | <0.05 | <0.05 | ~ | ~ |
6005 | 0.6~0.9 | 0.40~0.60 | <0.35 | <0.10 | <0.10 | <0.10 | <0.10 | <0.10 |
6061 | 0.4~0.8 | 0.80~1.2 | <0.70 | 0.15~0.4 | <0.15 | <0.25 | 0.04~0.35 | <0.15 |
6082 | 0.7~1.3 | 0.60~1.2 | <0.50 | <0.1 | 0.4~1.0 | <0.20 | <0.25 | <0.10 |
6351 | 0.7~1.3 | 0.40~0.8 | <0.50 | <0.1 | 0.4~0.8 | <0.20 | ~ | <0.10 |
2) Mechanical property
Alloy | Temper | Tensile strength | Yield strength | Elongation |
6063 |
T5 | ≥ 160Mpa | ≥ 110Mpa | ≥ 8% |
T6 | ≥ 205Mpa | ≥ 180Mpa | ≥ 8% | |
6061 | T5 | ≥ 265Mpa | ≥ 245Mpa | ≥ 8% |