Delivery Time:Stock for small quantity, 5-7 working days for bulk order
Certification:CE, ROHS

 
LTE 4G High Speed Industrial Cellular Router with 2 x LAN , 1 x RS232 and 3 x I / O

WL-R210LF-d 4G router is an ideal wireless data transfer device for applications transferring large data load because of ultimately fast transfer speed in LTE network reaching up to 100M download and up to 50M upload. VPN features also can be configured in WLINK router, allowing you to utilize virtual private network service through a 4G/3G wireless router and built for stresses and workload of a modern industrial or commercial environment.

With dual SIM function, WL-R210 series router could backup network between the two SIM cards to ensure continuous connection. With optional GPS capability, enable the router ideal for fleet tracking or access management.

The WL-R210-d with Ethernet capability, also come with a serial RS232 port and 3 digital I/O.

The R210 has two isolated binary inputs and one relay outputs for direct connection of sensors and actuators. The logic for the inputs/outputs is implemented by the user in the SDK environment on the router.

 
 
Basic Feature

Industrial robust design and compact metal housing

3 x digital I/O (Input/Output)

Ultra security, VPN: PPTP, L2TP, GPE, IPSec VPN High data speed 4G network, 3G and 2.5G backward compatible MIMO antenna for 4G to get higer speed and better performance Strong electromagnetic interference Resistance 802.11b/g/n Wi-Fi support, 150Mbps data rate Heat endurance and radiation ability Built-in watch dog, Multi-link detection High Reliability: Hardware l ink self-recovery WAN port support PPPoE, static IP, DHCP client. Failover or Backup between WAN and Cellular Always online, reboot automatically if disconnected to ensure continual connection Support APN and VPDN wireless private network access in LCP/ICMP/flow/heartbeat check, ensure network usability Web/CLI/SSH/Management platform support, easy configure SNMP network management, NTP support Local & remote management (configuration, status, upgrade firmware) Supports DHCP Server Supports DNS proxy and Dynamic DNS (DDNS) Supports timing operation Supports LED status indication Shock and vibration resistant

  
   Advance Optional Feature

Dual SIM Dual Module optional available for fast switch and backup between two network GPS capability optional for fleet management or other tracking application DTU serial communication function optional M2M Management platform software option al available Optional support to control by SMS OpenVPN Optional OpenWRT Optional PPTP Sever optional Schedule reboot optional Customized acceptable

 
Specification
 

Specification
Supports Mobile Network	◎ 4G FDD: 1800/2100/2600MHz           TDD: 1900/2300/2600MHz ◎ HSPA+ 3G 850/900/1900/2100MHz ◎ EDGE/GPRS 850/900/1900/2100MHz	Ethernet Standard	◎ IEEE 802.3 ◎ IEEE 802.3u
Interface	◎ 2×10/100Mb LAN (1XLAN, 1xWAN) ◎ 1× RS-232 console port(RJ45) ◎ 3× I/O(input/output user-defined) ◎ 2× SMA-K antenna interface ◎ 2× Standard SIM/R-UIM interface ◎ 1× Standard DC power interface	LED Instruction	◎ PWR ◎ Signal ◎ WLAN ◎ ERR ◎ LAN (LAN, LAN/WAN)
Route Protocol	◎ Static route ◎ RIPv2 / OSPF dynamic route	Power Supply	◎ 7.5 ~ 32VDC
Device Management	◎ Local or remote web browser (IE v8 or above) ◎ CLI / Telnet command ◎ M2M management platform (optional) ◎ SSH configure (optional)	WiFi	◎ Standard: IEEE 802.11b/g /n ◎ WEP, WPA and WPA2 encryption ◎ Standard 150Mbps, 300Mbps optional ◎ AP, Client, station, bridge mode support
Firewall & Filter	◎ IP packet / Domain / MAC filter ◎ NAT ◎ DMZ	VPN(Optional)	◎ IPSec ◎ PPTP/L2TP client ◎ GRE/IPIP
Power Consumption	◎ Idle: 80mA@+12VDC ◎Single Module Communications: 320mA@+12VDC	Other	◎ Dimension: 102mm x 100mm x 42mm (not including antenna) ◎ Weight: 350g