Delivery Time:Stock for small quantity, 5-7 working days for bulk order
Certification:CE, ROHS

 
LTE 4G High Speed Cellular Industrial Router with WiFi, 802.11n
 
The WL-R520LH1 under WLINK R520 series is a powerful and programmable industrial mobile broadband router for remote management, telemetry, condition monitoring, CCTV, ATMs, vending machines and other M2M applications.For mobile internet access a GSM/UMTS or a GSM/UMTS/LTE modem is embedded. The best available service is selected automatically.
As a special highlight WLINK R520 offers fine Ethernet ports that are highly configurable. Used as LAN ports they form a fine port switch or have separated, routed IP networks. Configured as WAN port, an external modem or land line can be attached in order to add redundancy.
The RS-232 serial interface can act as serial device server or system console. Legacy equipment that does not have any Ethernet or USB port can be hooked up this way. Furthermore, the serial line can be assigned to the SDK and be controlled from there.
The router firmware supports common VPN technologies such as IPsec and OpenVPN. Both, server and client mode is possible. Simple handling of a Public key infrastructure makes is easy to connect two router trough a VPN tunnel.
Further services include DHCP server, DNS proxy server, DDNS agent, SNMP agent, telnet server, SSH server, web server, e-mail client and SMS client. The device is administrated via an easy to use web GUI or the command line interface. Over the air software update is both easy and fail-safe.
 
 
Basic Feature

Industrial robust design and compact metal housing WAN port support PPPoE, static IP, DHCP client. Ultra security, VPN: PPTP, L2TP, GPE, IPSec VPN High data speed 3G network, 2.5G backward compatible Strong electromagnetic interference Resistance High Reliability: Hardware link self-recovery 802.11b/g/n Wi-Fi support, 150Mbps data rate Heat endurance and radiation ability Built-in watch dog, Multi-link detection Failover or Backup between WAN and Cellular Always online, reboot automatically if disconnected to ensure continual connection Support APN and VPDN wireless private network access in LCP/ICMP/flow/heartbeat check, ensure network usability Web/CLI/SSH/Management platform support, easy configure SNMP network management, NTP support Local & remote management (configuration, status, upgrade firmware) Supports DHCP Server Supports DNS proxy and Dynamic DNS (DDNS) Supports timing operation Supports LED status indication Shock and vibration resistant

  
   Advance Optional Feature

GPS capability optional for fleet management or other tracking application DTU serial communication function optional M2M Management platform software option al available Optional Dual SIM for redundancy Optional support to control by SMS OpenVPN Optional OpenWRT Optional PPTP Sever optional Schedule reboot optional Customized acceptable

 
Specification
 

Specification
Supports Mobile Network	◎ 4G LTE  2600/2100/1800/900/850/800MHz     DC-HSPA+ / HSPA+ 3G 800/850/900/1900/2100M ◎ EDGE/GPRS 850/900/1900/2100MHz	Ethernet Standard	◎ IEEE 802.3 ◎ IEEE 802.3u
Interface	◎ 4*LAN, 1*WAN (5xLAN optional) ◎ 1× RS-232 console port(optional) ◎ 2× SMA-K antenna interface ◎ 1× Standard SIM/R-UIM interface ◎ 1× Standard DC power interface	LED Instruction	◎ WLAN ◎ WLAN  ◎ WAN  ◎  LAN (LAN1 ~ LAN4)
Route Protocol	◎ Static route ◎ RIPv2 / OSPF dynamic route	Power Supply	◎ 7.5 ~ 32VDC
Device Management	◎ Local or remote web browser (IE v8 or above) ◎ CLI / Telnet command ◎ M2M management platform (optional) ◎ SSH configure (optional)	WiFi	◎ Standard: IEEE 802.11b/g /n ◎ WEP, WPA and WPA2 encryption ◎ Standard 150Mbps, 300Mbps optional ◎ AP, Client, station, bridge mode support
Firewall & Filter	◎ IP packet / Domain / MAC filter ◎ NAT ◎ DMZ	VPN(Optional)	◎ IPSec ◎ PPTP/L2TP client ◎ GRE/IPIP
Power Consumption	◎ Idle: 80mA@+12VDC ◎Single Module Communications: 320mA@+12VDC