Salt Spray Test Chamber, buy AC220V 50Hz Programmable Salt Spray Testing Machine With JIS Standard on China Suppliers Mobile

Product Details

Delivery Time:10 working days after received your payment
Certification:ISO, SGS

JIS Standard Air-transportable 108L Salt Spray Chamber for Surface Treatment Testing

1. Application of Salt Spray Testing

Salt water spray test chamber is widely used in Corrosion Resistance Test for products after treated by plating, anodized, spraying, and anti-rust, to test the surface treatment of various materials. Those so-called treatments include coating, electroplating, and films of organic and non-organic materials, anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.

2. Specifications:

Specifications (Note: We reserve the right to change specifications without prior notice)
Model	HL-160-NS	HL-120-BS	HL-90-BS	HL-60-SS
Interior dimensions(WHD)mm	1600 X 500 X 1000	1200 X 500 X 800	900 X 500 X 600	600 X 400 X 450
Exterior dimensions(WHD)mm	2240 X 1500 X 1600	1410 X 1280 X 880	1460 X 1280 X 910	1130 X 1070 X 630
Testspace Volume(L)	800	480	270	108
Salt Water Tank Volume (L)	60	40	25	15
Heater	15KW+1KW	11KW+1KW	7KW+0.75KW	3KW+0.75KW
Air compressor	2HP	2HP	1/2HP	1/2HP
Temp. range (Testing barrel)	35±1℃～50±1℃
Temp. range (Pressure barrel)	47±1℃～63±1℃
Test applicable	NSS, ACSS,CASS,CORK
Pressed Air Pressure	1.00±0.01kgf/cm²
Spray Amount	1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average)
Ambient Relative Humidity	More than 85%R.H.
PH Value	6.5~7.2 3.0~3.2
Spraying Manner	Programmable Spraying
Power	AC220V 1Φ 50Hz

3. Why Salt Spray is Common and Popular?

Salt spray testing is popular because it is relatively inexpensive, quick, well standardized, and reasonably repeatable. There is, however, only a weak correlation between the duration in salt spray test and the expected life of a coating (especially on hot dip galvanized steel where drying cycles are important for durability) sincecorrosion is a very complicated process and can be influenced by many external factors.

The principle application of the salt spray test is therefore enabling quick comparisons to be made between actual and expected corrosion resistance. Most commonly, the time taken for oxides to appear on the samples under test is compared to expectations, to determine whether the test is passed or failed. For this reason the salt spray test is most often deployed in a quality audit role, where, for example, it can be used to check the effectiveness of a production process, such as the surface coating of a metallic part. The salt spray test has very little application in predicting how materials or surface coatings will resist corrosion in the real-world, because it does not create or accelerate real-world corrosive conditions. Cyclic corrosion testing (CCT) is much more suited to this application.

4. Salt Spray Test Chamber System Diagram

5. Packing Info about the Salt Water Spray Test Chamber:

In the following pictures, you can see the back stents:

and the front drainage outlets:

We provide two ways for your choice about packing:

A, Pack up directly, this needn\'t your more work but a bigger packing size;

B, Packing after tearing down the front drainage outlet and the back stents, then the package size and weight will become less. even you can choose to deliver by air. You just need to install the drainage outlets and stents again, but that\'s very easy. For example: