Delivery Time:Within 15 days

Low Power DVB-T UHF Terrestrial DTV Transmitter

GT-5900 Series 

Product Overview

      Gospell’s GT-5900-300 series is an indoor UHF Digital Terrestrial Television (DTT) transmitter/gap filler with up to 300W of output power, and is designed for small-scale or blind area coverage application in DTT broadcasting.

      GT-5900-300 series utilizes the state-of-the-art LDMOS devices and compact 4U rack-mount structure that enables DTT operators to have reduced energy cost and with much less occupied space of equipment in their DTT network. This series supports various DTT modulation standards, such as DVB-T/H, DVB-T2, DTMB, ATSC, ISDB-T/Tb, and also can operate in SFN mode enabling less spectrum resource is used.

      The GT-5900-300 series incorporates multiple self-protected mechanisms, including high VSWR, over-temperature, over drive, over current, over voltage and under voltage. It supports Web based management and maintenance for remote status monitoring and controls, this can significantly reduce management time and operating expense (OPEX). By incorporating the latest technologies of RF delay and co-channel interference rejection, this system fulfills the needs for DTT coverage of SD and HD digital television programs. This is especially suitable for small-scale coverage and gap filling with complex terrains.

Main Features:

· 470MHz to 860MHz

· Available output power from 5W to 300W

· Built-in band pass filter(5-200W)

· Supports single channel or broadband transmission

· Built-in non-linear pre-correction module (optional module for 200W and 300W)

· Optional up to 80MHz of transmitting channel bandwidth within the UHF span

· Low power consumption with high efficient LDMOS amplifiers to reduce electricity costs for operators

· Multi-standard capability, supports multiple DTT standards: DVB-T/H, DVB-T2, ATSC, DTMB and ISDB-T/Tb

· Low power consumption and minimized non-linear distortion

· Extreme low group delay for DTV signal transmission

· Front panel LED indicators, supporting status/alarm indications

· 10/100Base-T network management interface, supporting Web -based management and maintenance

· Built-in LCD touch screen, supporting status monitoring, parameter configurations and malfunction alarms, such as transmitting power, VSWR, working voltage/current, fan speed, IP address and so on

· Multiple protection mechanisms: overdriving, over-temperature, over-current and high VSWR

· Large and dynamic Auto Gain Control (AGC) circuit ensures stability of output power

· Shorten MTTR, built-in modular function unit, supporting fast replacement of faulty component

· Adopts two long-life cooling fans for superior cooling performance and improved stability

Block Diagram:

Technical Specifications

General Parameters	Ordering Codes	GT-5900 -5	GT-5900 -10	GT-5900 -20	GT-5900 -30	GT-5900 -50	GT-5900 -100	GT-5900 -200	GT-5900 -300
Output Power(RMS)*	5W	10W	20W	30W	50W	100W	200W	300W
Weight	20kg	20kg	20kg	20kg	20kg	25kg	40kg	40kg
Frequency Range	470 to 860MHz
Supported Standards	DVB-T,DVB-T2,DVB-H,DTMB,ATSC,ISDB-Tb
Transmitting Mode	Standard: Single band Optional: Broadband (maximum 80MHz)
Supported Network	MFN,SFN
Cooling Method	Forced Air Cooling with two cooling fans
Exciter/ Modulator(optional)**	Optional DVB-T2 or DTMB modulator (1U)
Pre-correction Module	N/A	Optional Built-in non-linear pre-correction module
Bandpass Filter	Built-in Single/Broad band BPF	Built-in Broad band BPF, optional external single band BPF	Optional External single/ broad band BPF
Dimensions (W x H x D)	482mm(19’’) x 178mm(4U) x 605mm(23.8’’)
Notes: * The above output powers are calculated per ATSC/ DTMB standards under single band mode; ** Please contact our sales representative for the other exciter/modulator requirements.
Electric Performance