Delivery Time:Within 7 days

8 In 1 MPEG-2/MPEG-4 To MPEG-4/MPEG-2 Transcoder
8 In 1 MPEG-2 To MPEG-4 Transcoder With ASI/RF Input
 

1: Support Mpeg-2 to Mpeg-4 conversion

2: Support ASI or RF input

Product Overview

    GOSPELL GN-1738 transcoder is highly competitive SD video conversion unit with best-in-class video quality. It can convert up to eight channels of MPEG-2 (or MPEG-4 AVC) SD live video streams to MPEG-4 AVC (or MPEG-2) video formats.

    The GN-1738 provides a wide range of real-time transport streams input options, from satellite, DVB-ASI and TS-over-IP inputs. This allows it handle any real-time video source, and 1+1 redundant transcoding outputs via both IP and DVB-ASI are also introduced, enabling a highly reliable video service to be delivered. In addition, the GN-1738 supports Web and SNMP-based management for conveniently local and remote management as well as maintenance.

    With the number of video formats increasing fast, DTV operators require the ability to have a transcoding solution to simplify their headend architecture and to reduce the amount of headend equipment needed. To achieve this, they need products able to deal with both MPEG-2 and MPEG-4 AVC video streams from different sources.

Main Features

MPEG-2 to MPEG-4 AVC, MPEG-4 AVC to MPEG-2 Up to eight channels of SD video conversion Supports MPEG-1 Layer II/AAC/HE-AAC v1&v2 audio streams pass-through Adopts advanced transcoding core High video quality but in ultra low bit rate Multiple video sources acquisition: 4 x DVB-S/S2 RF inputs or 4 x DVB-ASI and IP inputs Support VBR/CBR video encoding MPEG TS-over-IP(7 x 188 Byte) output, supporting MPTS/SPTS Dual TS-over-UDP outputs, supporting 1+1 redundant configuration Dual DVB-ASI outputs, supporting 1+1 redundant configuration Front panel control and LCD display SNMP-based management for remote monitoring and control Web-based network management for local and remote management and software upgrade

Technical Specifications

RF Input Option
Numbers of Input	4 x RF Input, 4 x RF Loop Out
Operation Mode	Independent input
Connector Type	F-Type (Female, 75Ω)
Frequency Range	950MHz to 2150MHz
Standards	DVB-S: EN 300 421 DVB-S2: EN 302 307
Constellations	DVB-S: QPSK DVB-S2: QPSK/8PSK
Symbol Rate	QPSK: 2.0Msym/s to 45Msym/s 8PSK: 10 Msym/s to 31Msym/s
Input Signal Level	-65dBm to -25dBm
LNB Power Output	0V/+DC 13V/18V LNB short circuit protection
TS Input Option
DVB-ASI Input
Numbers of ASI Input	4 x ASI
Operation Mode	Independent input
Connector	BNC female, 75W
Standards	DVB-ASI
TS Packet Length	188 or 204 Bytes
MPEG TS-over-IP Input
Number of IP Output	1 x 10/100 Base-T Ethernet
TS Format	7 x 188Byte
IP Encapsulation	MPEG TS-over-UDP/IP
MPEG TS	MPTS, SPTS
Addressing	Unicast or Multicast
Connector	RJ-45
ASI Transcoding Output
Number of ASI Outputs	2 x ASI
Operation Mode	1+1 Redundant output
Connector	4 x BNC*, 75W
TS Packet Length	188 Bytes
TS Output Bit Rate	2 to 60Mbps
Notes: Only two BNC connectors are available for ASI outputs, the rest two are not available.
MPEG TS Over IP Transcoding Output
Qty of IP Output	2 x 10/100 Base-T Ethernet
Operation Mode	1+1 Redundant output
TS Output Bit Rate	2 to 60Mbps
TS Format	7 x 188Byte
IP Encapsulation	MPEG TS-over-UDP/IP
TS Mode	MPTS, SPTS
Number of TS Output	8 TS
Addressing	Unicast or Multicast
Connector	RJ-45