Delivery Time:10-25 WORKING DAYS
Certification:ISO9001:2008

Compatible WESTWIND WWD1822 200,000RPM KL200P1 Air Bearing Spindle PCB PRECISION DRILLING 

Quick Detail:

MODEL	REPLACE FOR	DESCRIPTION	KEY PRECISION	Machine reference
KL200P1	D1822 D1686	SPEED RANGE: 20,000 - 200,000 rpm Ø6.35mm-0.05mm  precision drilling	Static Runout:<2µm Dynamic Runout:<6µm Vibration:0.5 MM/S	KLINGINBERG PLURITEC HITACHI LENZ SCHMOLL ANDERSON ….

PRODUCT DESCRIPTION

KL200P1  higher speed rotation and higher accuracy spindle replace for WESTWIND WW D1822 Full Range from 20,000 to 200,000 rpm, air bearing type in long life, spindle weight  3.9kg with COLLET size 1/8” and body size Ø 61.9

Max power:0.85KW

Air Pressure: 6.0 -6.5kgf/cm²

Coolant:Water oil

Fixed voltage:200V

Fixed current:3A

FREQUENCY (HZ): 334-3350

PTC or NTC Sensor for choose

Square wave available

Competitive Advantage:

Low Static

Low Dynamic RUN OUT

Stable character and long life

Power and very low heat generation

ATC feeder / ATC tool change for micromachining

KLKJ Advantage

The higher spindle speeds available allow for increased productivity whilst ensuring that accuracy and repeatability is

maintained.

Advanced analysis and detailed design has created a spindle with exceptional reliability and increased efficiency.

KLKJ strong team available allows increased productivity and efficiency. 

APPLICATION :

PRINT CIRCUIT BOARD PRECISION DRILLING

HOLE RANGE: Ø6.35mm-0.05mm

MACHINE REFERENCE:KLINGINBERG PLURITEC ；HITACHI ；LENZ ；ANDERSON ;SCHMOLL….

SPECIFICATION:

Coolant water temperature	20+2
Static runout	<2µm
Dynamic runout	<6µm
Collet torque(N.cm)	>13( 1/8”)
Vibration	0.5MM/S
Temperature sensor ohms KΩ	R=0.10±5% AT 25℃
Open air pressure	<5.0kg/cm²
Close air pressure	>2.5 kg/cm²
Coolant water flux	>2.0(L/min)
Coolant oil flux	>3.8(L/min)
Air consume flux at 20krpm	48(L/min)
Radial load	6.0kgf

                                    Compatible D1822 200,000RPM KL200P SPINDLE DRAWING

Why choose KLKJ?

With nearly 15 years technology in spindle maintenance, 10 years success experience for spindles parts production, and 9 years spindle R&D, KLKJ succeed in offer air bearing spindle up to 200krpm.

All spindles at the KLKJ are fully checked and tested using stringent quality control procedures. KLKJ ensures every repaired spindle passes the following points to make it in long life and stable character:

1.     Air flow

2.     Water flow

3.     End float/lift off

4.     Axial load (inner)

5.     Axial load (outer)

6.     Torque

       7.  Static RUNOUT

       8.  Dynamic RUNOUT

      9.  Motor check

    10. Vibration

    11. Material analysis & strictly quality test detection control