Delivery Time:10-25 WORKING DAYS
Certification:ISO9001:2008

 
 
Compatible WWD1822 200,000RPM KL200P1 PCB Drilling Spindle 
 
 
Quick Detail:
 

MODEL	REPLACE FOR	DESCRIPTION	KEY PRECISION	Machine reference
KL200P1	D1822 D1686	SPEED RANGE: 20,000 - 200,000 rpm Ø6.35mm-0.05mm  precision drilling	Static Runout:<2µm Dynamic Runout:<6µm Vibration:0.5 MM/S	KLINGINBERG PLURITEC HITACHI LENZ SCHMOLL ANDERSON ….

 
 
 
 
PRODUCT DESCRIPTION
 
KL200P1 high frequency spindle replace for WW D1822 or For WWD1686 Full Range from 20,000 to 200,000 rpm, air bearing type in long life, spindle weight 3.9kg with COLLET size Ø1/8” and body size Ø 61.9
 
Max power: 0.85KW
Air Pressure: 6.0 -6.5kgf/cm²
Coolant: Water oil
Fixed voltage: 200V
Fixed current: 3A
FREQUENCY (HZ): 334-3350
PTC or NTC Sensor for choose
Square wave available
 
 
 
Competitive Advantage:
 
Low Static
Low Dynamic RUN OUT
Stable character and long life
Suitable for precision drilling
Air bearing type offer Greater Precision, High Speed , Increased Tool Life, Improved Surface Finish, Long Bearing Life, Low Thermal Growth, Lack of Maintenance, Large Load Capacity , Reduced Vibration , Cleanliness.
 
 
 
APPLICATION :
 
PRINT CIRCUIT BOARD PRECISION DRILLING
HOLE RANGE: Ø6.35mm-0.05mm
MACHINE REFERENCE:KLINGINBERG PLURITEC ；HITACHI ；LENZ ；ANDERSON ;SCHMOLL….
 
 
 
 
SPECIFICATION:
 

Coolant water temperature	20+2
Static runout	<2µm
Dynamic runout	<6µm
Collet torque(N.cm)	>13( 1/8”)
Vibration	0.5MM/S
Temperature sensor ohms KΩ	R=0.10±5% AT 25℃
Open air pressure	<5.0kg/cm²
Close air pressure	>2.5 kg/cm²
Coolant water flux	>2.0(L/min)
Coolant oil flux	>3.8(L/min)
Air consume flux at 20krpm	48(L/min)
Radial load	6.0kgf

 
 
 
                                 
 
  Compatible D1822 200,000RPM KL200P1 SPINDLE DRAWING
 
 
 


 
 
 
Why choose KLKJ?
 
With nearly 15 years technology in spindle maintenance, 10 years success experience for spindles parts production, and 9 years spindle R&D, KLKJ succeed in offer air bearing spindle up to 200krpm.
 

All spindles at the KLKJ are fully checked and tested using stringent quality control procedures. KLKJ ensures every repaired spindle passes the following points to make it in long life and stable character:

1.     Air flow

2.     Water flow

3.     End float/lift off

4.     Axial load (inner)

5.     Axial load (outer)

6.     Torque

       7.  Static RUNOUT

       8.  Dynamic RUNOUT

      9.  Motor check

    10. Vibration

    11. Material analysis & strictly quality test detection control

   12. Stringent tolerance control