3 in 1 BGA Rework Station YIHUA 968DB+ with Smoke Absober

3 in 1 BGA Rework Station YIHUA 968DB+ with Smoke Absober are  patented products , the Patent No.  2012306291727 , we are  not allowed counterfeit .          

3 in 1 BGA Rework Station YIHUA 968DB+ with Smoke Absober Function

1, Machine internal main board use dual panel,chip manufacturing process, higher quality, more stability；

2, To additional smoke absorb function, effectively to remove the smoke and dust generated during the welding process;

3, 28L ultra-stabilizing atmospheric diaphragm pump wind, strong wind, long service life;

4, Soldering iron part using a high-power imported heater, small or large solder joints can be easily de-soldering;

5, Temperature correction function, the aging of the heater and tip temperature deviation, use the correction;

6, Use PID program precise temperature control, temperature precise, and can effectively avoid the temperature error damage delicate components or motherboard, additional wind speed ball window, the observed air volume more intuitive.

3 in 1 BGA Rework Station YIHUA 968DB+ with Smoke Absober Function

1. LED display air gun and iron work temperature, function indicates at a glance and nice .

2. It adopts more powerful , more stable performance of the Samsung CPU.

3. Only four buttons , operate simply and clearly.

4. Air speed  ball dynamic display airflow .

5. It adopts PID precision temperature control algorithm, the temperature fluctuation range of ≤ ± 1 °C.

6. -50 °C to +50 °C temperature compensation function

7. Fahrenheit  / Celsius temperature conversion functions.

8. Soldering iron has smoke absorbed function . Smoke generated by soldering iron was immediately sucked away , after a dust-sheet absorption , filtration, this function is to achieve air purification effect, to bring users healthy , environmentally friendly work environment , no longer have to worry about the smoke produced for the use of soldering iron

9. High temperature automatic protection .

10. Airflow 28L / min , by the strong pressure of the pump as the air source , long life.

11. The machine part of the device has a self-test function , the whole intelligent over-temperature , short circuit , open circuit , overload , fault indication and protection functions.

12, The air gun steel tube use stainless steel tube , the air gun handle lines and soldering iron handle lines are silicone wire , high temperature , you can use for a long time.

13. All functions data setting is automatically saved , without duplication.

14. 3 in 1 repairing station the combines Hot Air Rework Gun with a Soldering Iron and a Smoke Absorber

3 in 1 BGA Rework Station YIHUA 968DB+ with Smoke Absober Technical Data