SMD Rework Station, buy BGA SMD Rework Station / Temperature Controlled Soldering Station on China Suppliers Mobile

Product Details

Certification:CE

BGA SMD Rework Station / Temperature Controlled Soldering Station

1. High-quality resistance good for long service life , low noise.

2. Microcomputer control , warms up quickly , and so does cooling.

3. Handle with sensor switch , the system will turn into the working mode while the handle is held ; and the system will standby while the handle is put on the holder , which is very convenient and Energy Save.

4. Suitable for SOIC , CHIP , QFP , PLCC , BGA , Heating Shrink , Drying , Lacquer Removal , Ice-Out , Pre - Heating and other temperature - sensitive components .

5. Closed circuit Sensor , microcomputer zero-crossing soft touch temperature control , LED visual display , high power , rapid rise of temperature , accurate and stable temperature , little influence of air outflow , and unsoldering without lead.

6. Be able to operate individually , work independence ; LED digital display accurancy 1 °C.

7. Wind volume and temperature are adjustable , suitable for many kinds of use .

8. Using sillica gel line good for long use.

9. This product is ESD-protected and CE approved

10. Shell using alloy material , elegant appearance ; Intelligent detection and cool airflow features.

The power of soldering iron station is 75W

NEW Features (Energy Saving and Convenient )

Manual / Auto Switchable for Rework Operation

SMD Rework Station / Temperature Controlled Soldering Station Hot Air Gun

1. Put the key to auto

When you put the hot air gun on the holder, the hot air gun will cooling to 100°C and automatic shut down .

Next time , when you take up the hot air gun , it will automatic heating up to the original temperature you have been set .

2. Put the key to manual

When you put the hot air gun on the holder , the hot air gun still work along.

SMD Rework Station / Temperature Controlled Soldering Station Soldering Iron

The blue key would set up 2 / 5 / 10 / 20 minutes

1. If you set up 2 minutes , when you put the soldering iron on the holder after 2 minutes that the soldering iron will enter the standby mode ( 200°C ) .

Next time , when you take up the soldering iron , it will automatic heating up to the original temperature you have been set .

2. If you not set up the minute that the soldering iron will keep the temperature along with your using.

·Blue / RED digital LED displays for Both rework and soldering station.

·The air flow and temperature with control keypad.

SMD Rework Station / Temperature Controlled Soldering Station Technical Data

Power consumption 720W

Gun Temperature range 100-480°C

Gun heater material Ferro-alloys

Gun heater resistance 74Ω

Gun type Brushless Fan air flow 120L / min

Soldering Iron Temperature range 200-480°C

soldering Iron Type Blue Handle

Soldering Iron Heater material Imported high-power heater

Soldering Iron heater resistance 3.5~4.1Ω

Gross weight 3.15KG / pcs

Inner box Dimension(cm) 26*16.5*14.8

Outer box Dimension(cm) 57.5*36*32

QTY 8PCS PER outer carton

Remark

Specifications and design subject to change without notice

What\'s In SMD Rework Station / Temperature Controlled Soldering Station Inner Box

* main unit + gun + power cord

* guide soldering iron

* soldering iron holder

* 4 nozzles

SMD Rework Station / Temperature Controlled Soldering Station Picture Display

These are 220V units you may need a transformer to use the machine in your country. we also do accept special orders for 110V / 230V/ 240V units.

SMD Rework Station / Temperature Controlled Soldering Station Our Warranty

* Credit Safeguard

GuangZhou YiHua Electronic Equipments Co,. Ltd was signed a contract with Alibaba and paid a large deposit , make buyers fee l comfortable buying

* Warranty policy

One Years warranty

As usual , the shipping fee are high . if return China to repair are not worth the money. So we could support technology and give you the spare parts along with the product .

Note warranty does not cover wearing parts , for example iron heater , gun heater , iron tips.

* Products discount

as usual we quote three price for each model sample price , over 60pcs price , over 500pcs price.

Those price are calculate our produce cost , as you know big order are less margin to sell . we hope take win-win business with both.

* Warm-heart note

1. If products upgrade or quality improve to change the technique parameter , the factory will not further notice.

2. If the customer haven\'t special request , the prod