chemical resistant Alumina engineering  Ceramics Liner wear resistant  material industry 1.Good wear- resistance performance
2.High density
3.Different options for backing
4.Easy to install

Alumina Ceramic Liner with Rubber is use of rubber vulcanization process, to embeded the wear- resistant 

ceramic vulcanized into rubber, stick it on the inner wall of equipment with the adhesive paste. 

It combines wear-resistance of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperature, and can bear some impact.

Widely used on the chutes,hoppers, ash pipelines and other equipment as wear protection liner in coal fired power plants, iron and steel industry. Liner can be bended, cut to install on all kinds of special-shaped equipment,and fireresisting, weak acid and alkali-resistance.This type is limited to below 100-300°C temperature environments.

Main Specifications:

Specification (mm)	Thickness of rubber (mm)	Thickness of ceramic (mm)	Total thickness (mm)
250x250x10(17.5x17.5x5)	10	5	15
250x250x15(17.5x17.5x8)	15	8	23
250x250x14(17.5x17.5x7)	14	7	21
500x500x6(17.5x17.5x3)	6	3	9
500x500x9(17.5x17.5x5)	9	5	14
500x500x10(17.5x17.5x6)	6	10	16

It also can make dimension according to customers’ request.

Ceramic technical parameters

Parts	Item	Index
ceramic	Al2O3	≥92%
Density	≥3.6 g/cm3
Rockwell Hardness	≥87 HRA
Compressive Strength	≥850MPa
Fracture Toughness	≥4.8MPa·m1/2
Bending Strength	≥290MPa
Thermal conductivity	20w/m.k
Coefficient of thermal expansion	7.2x10-6m/xm.k
Rubber	Tensile Strengh	≥12Mpa
Break Extensiion	≥250%
Shore Hardness	55-65
Break permanent deformation	≤24%
Rubber and ceramic adhension	≥3.0Mpa
Temperature	≤100~300°C