Delivery Time:3-14 days on payment
Certification:CE, 3C

High performance current vector frequency inverter / VFD Frequency Inverter Drive

HV1000-VL
AC 3 phase 220V/380V, 0.75 - 560 kw, Single phase 0.4 - 2.2 KW Specialized for CNC wood veneer peeling lathe Frequency Inverter Equal quality and feature with Emerson EV3000 but much more cost-effective, much better feature than Emerson commander SK Drive induction motor / synchronous servo motor / asynchronous servo motor High performance current vector frequency inverter Various accessories for different applications: e.g. PG cards, communication cards

Description:

HV1000-VL is developed specially for wood veneer peeling lathe by HNC Automation. Based on high performance of HV1000, we developed parameter system specially for winding device. It could be used very easily and match the requirement of CNC wood veneer peeling lathe perfectly.

HV1000 series of VFD has equal quality and feature with Emerson EV3000 but much more cost-effective, much better feature than Emerson commander SK. It satisfies high performance requirements by using a unique control method to achieve high torque, high accuracy and wide speed-adjusting range. Its anti-tripping function and capabilities of adapting severe power network, temperature, humidity, and dusty environment exceeds those of similar products made by other companies, which improves the products reliability noticeably.

Advantages of HV1000-VL

1:Adopt unique current limit technology, perfect acceleration/deceleration performance

2:Sensor-less vector technology, ensure the power in cutting

3:Unique over-modulation technology, ensure the torque in high frequency

4:Steady and reliable Modbus communication

Input terminal

FWD        start

REV        stop

VCI         Fast-Forward

CCI         Fast-Backward

X1          Max-limit

X2          Min-limit

X3          Cutter position

X4～X5      Phase A/B(encoder)

Output terminal

(1)Relay1     Control the start/stop of the roller motor

(2)Relay2     Pushing control

(3)Y1         Cutting control

(3)Y2         ood-board cutting Frequency control

Applications:

HV1000-VL is specially for CNC wood veneer peeling lathe. We provide special parameter system and hardware for this machine. Our engineer could support you with complete application experience.

Specifications:

Item	Description

Input

Rated voltage；Frequency

HV1000-4T-xxxxx:380V～440V；50Hz/60Hz

HV1000-2Sxxxxx:200V～240V；50Hz/60Hz

Permissible fluctuation range

Continuous  fluctuation range≤±10%,Short time fluctuation range≤-15%～+10%；

Voltage unbalance range≤3％；Frequency≤5％

Output

Rated voltage

HV1000-4T-xxxxx:0～380V/440V

HV1000-2Sxxxxx:0～200V/240V

Frequency

0Hz～650Hz

Over load ability

G type:150％rated  current  for 1 minute,180％rated current for 3s/1s(380V/220V series),200% rated current for 0.5s；

P type:120％ rated current for 1 minute

Control functions

Modulation mode

Flux vector PWM modulation

Speed range

1:100

Starting torque

180% rated torque at 0.5Hz

Accuracy of speed at steady state

≤±0.5％ rated synchronous speed

Torque boost

Auto torque boost,Manual torque boost

Acc/Dec curve

Linear,S curve；4 Acc/Dec time；

Unit(minute/second),60hours at most

Jog

Jog frequency: 0.10-60.00Hz: Acc/Dec time: 0.1-60