Delivery Time:3-14 days on payment
Certification:CE, 3C

HEC8000 CE Speed Control Elevator Integrated Controller 380V 7.5KW~45KW

Professional Elevator Integrated Controller, The real distance control to the principle of the direct call technology, N curves generated automatically Based on the theory of fuzzy control following 8 elevator group control algorithm Power range: 7.5KW~45KW, Applicable Various Encoder Type: sin/cos, ABZ/UVW incremental encoder, etc. Accurate built-in real-time clock, provide various time-sharing control, facilitate the realization of building intelligent control Multi-CPU redundant control

Description:

HEC8000 Elevator Integrated Controller

The HEC8000 series of integrated controllers for elevators was developed and manufactured by HNC Automation, organically combining elevator control and motor drive to Create a new generation of intelligent, vector integrated controllers for elevators.

Technical Features

Multi-CPU redundant control, integration of advanced Canbus./ Modbus / GSM communication technology. The real distance control to the principle of the direct call technology, N curves generated automatically. Only three communication lines easy for two parallel control. Based on the theory of fuzzy control following 8 elevator group control algorithm. Accurate built-in real-time clock, provide various time-sharing control, facilitate the realization of building intelligent control, Flexible 48DC or 220AC power input for power failure rescue plan. Stop short of the automatic identification operation. Handheld -operation device, keypad, PDA, PC and so on for the whole range provides a convenient method of debugging. 60 fault discrimination, and storage of information and numerous failures, easy for maintenance check.

Applicable Encoder Type

Incremental (asynchronous machine) UVW (synchronous machine) SIN/COS(no weighing synchronous machine)

Specifications:

Port

Digital signal input points, analog input, relay output, 232 communication port, 485 communication, CAN bus port Label Name Terminal X1 ~X24 1. photocoupler isolation input Digital input 2. input impedance: 4.7kΩ Function selection 3. voltage input range: 15~30V 4. input current limit 5mA Al Analog input terminal Analog input signal terminal, input specifications-10V-10V, analog weighing device for use M Analog input common terminal Y1---Y6 ~ M1 --- M6 Normally open relay point output 5A,259VAC, code set by the corresponding functional Relay Output function selection

Selection and brake resistors configuration

HEC8000 elevator integrated controller, models that below 30KW (30KW included) have been equipped with brake unit, and users can simply install an external resistance. Models that above 30KW need to be equipped with external brake units and brake resistor. Model Input voltage Capacity (kVA) Input current (A) Output current (A) Motor adapter (kW) Brake res